Roof Rack Brackets
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
|
1 each, as needed |
MY BIW BSO ROOF RACK BRKT LH SVC E-COATED (Roof Rack Bracket – Front LH) MY BIW ROOF RACK BRKT RH SVC E-COATED (Roof Rack Bracket – Front RH) MY BIW BSO ROOF RACK BRKT RR LH SVC E-COATED (Roof Rack Bracket – Rear LH) MY BIW ROOF RACK BRKT RR RH SVC E-COATED (Roof Rack Bracket – Rear RH) |
Note Each roof
rack bracket (front LH, front RH, rear LH, and rear RH) has
a different part number. Order the correct replacement
bracket for each bracket being replaced. |
| 2 |
Flow Form Rivet S38
|
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
-
Remove the original component.
or 
Factory Spot Welds
-
Prepare for installation.
NoteA red X indicates a location where a factory-installed fastener is not being replaced.
- Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
- Install the new component or components.
- Perform any necessary post-repair operations.
