Rear Quarter Inner
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | MY Rear Quarter Inner SVC E-COATED (Rear Quarter Inner) |
|
| 8 | ||
| 1 |
Note This
fastener is required only when replacing the RH Rear Quarter
Inner. |
|
| 1 |
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
-
Remove the Rear Quarter Outer.
-
Remove the original component.
or 
Factory SPRs
or 
Factory Spot Welds
-
Prepare for installation.
NoteA red X indicates a location where a factory-installed fastener is not being replaced.
or 
High Strength Structural Rivets, 6.5 mm
- A = 17 mm
or 
Flow Form Rivets, S18
NoteThis fastener is required only when replacing the RH Rear Quarter Inner.
- Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
- Install the new component or components.
-
Install the Rear Quarter Outer.
- Perform any necessary post-repair operations.
