In the Powerwall 3 Accessory Bag

Powerwall 3 Accessory Bag: Tesla P/N 1857363-00-x

  • (8) M6x17 fasteners for mounting the Powerwall 3 front cover (Tesla P/N 1847553-00-A)
    Informational PurposesAn informational icon, calling your attention
    Note
    The front cover fasteners are single use. Only (6) fasteners are required, with (2) extra fasteners included in the accessory bag.
  • (6) MPPT jumpers
  • (2) cable tie mounts
  • (1) small clamp-on ferrite core for the factory-installed low voltage harness
  • Powerwall 3 P/N 1707000-00-H and lower: (2) large clamp-on ferrite cores with (2) cable ties for the AC and PV conductors
  • Powerwall 3 P/N 1707000-00-J and higher: metal PV shield