2026-08-09
캐리어 - 로커 패널 - LH(탈거 및 교체)
교정 코드
12202402 0.12
NOTE: Unless otherwise explicitly
stated in the procedure, the correction code and its associated FRT reflect all of the
work required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. NOTE: See for safe and healthy working
practices.
토크 규격
| 설명 | 토크 값 | 권장 공구 | 재사용/교체 | 참고 |
|---|---|---|---|---|
| LH 하단 로커 캐리어를 차체에 고정하는 볼트 |
![]() 5 Nm (3.7 lbs-ft) |
|
재사용 |
탈거
- LH 로커 패널 커버를 탈거합니다. 커버 - 로커 패널 - 하단 - LH(탈거 및 교체)을(를) 참조하십시오.
-
LH 로커 패널 캐리어를 차체에 고정하는 볼트를 탈거합니다.
5 Nm (3.7 lbs-ft)팁다음 공구를 사용하는 것이 좋습니다.- 10mm 소켓
-
LH 하단 로커 캐리어를 차체에 고정하는 클립을 분리한 후, 차체에서 캐리어를 탈거합니다.
장착
장착 절차는 탈거의 역순입니다.