2026-11-06
절연체 - 휠하우스 - 세트(탈거 및 교체)
교정 코드
15307402 1.1
NOTE: Unless otherwise explicitly
stated in the procedure, the correction code and its associated FRT reflect all of the
work required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. NOTE: See for safe and healthy working
practices.
- 2026-10-20: 절연체를 절단하여 탈거하는 단계를 업데이트했습니다.
- 2023-10-09: 후면 페시아 어셈블리 장착 및 탈거 관련하여 참조를 업데이트했습니다.
- 2023-10-10: 충전 포트 도어를 수동으로 닫지 않도록 하라는 주의 사항을 추가했습니다.
필요 장비:
- 1076927-00-A Hioki 테스터
- 1054720-00-A 휴대용 벤치
- 1060071-00-A 토크 렌치 1/4인치 드라이브 육각
- 1076928-00-A 테스트 프로브 - Hioki 9461
탈거
- RH 휠하우스 절연체를 탈거합니다. 참조 항목: Wheelhouse Insulator - Rear - RH (Remove and Replace).
- LH 후면 휠하우스 절연체를 탈거합니다. 참조 항목: Insulator - Wheelhouse - LH (Remove and Replace).
장착
- RH 휠하우스 절연체를 장착합니다. 참조 항목: Wheelhouse Insulator - Rear - RH (Remove and Replace).
- LH 후면 휠하우스 절연체를 장착합니다. 참조 항목: Insulator - Wheelhouse - LH (Remove and Replace).