Wheelhouse Insulator - Rear - RH (Remove and Replace)
Code de correction
15300401
15300402
FRT
0.96
REMARQUE : À moins d’indications explicites contraires dans la procédure, le code de correction et le temps à taux fixe (FRT) connexe représentent tout le travail à accomplir pour cette procédure, y compris les procédures connexes. N’appliquez pas plusieurs codes de correction à la fois, à moins qu’il vous soit explicitement indiqué de le faire.
REMARQUE : Consultez pour en apprendre plus à propos des temps forfaitaires et de leur création.
NOTE : Consultez Protection individuelle pour vous assurer de porter l’équipement de protection individuelle adéquat lorsque vous effectuez la procédure ci-dessous.
REMARQUE : Voir pour consulter les pratiques de travail sécuritaires et saines.
- 2026-10-20: Updated the steps of removing the insulator by cutting it open.
- 2025-12-01: Released new procedure.
Retirer
- Open all four doors and lower all four windows.
- Open the liftgate.
- Remove the subwoofer. See Caisson des basses (retirez et remplacez).
-
Release the clips (x2) that secure the RH body harness to the RH side trunk
bulkhead.
-
Release the RH body harness clip from the C-pillar and pull the harness backward to
move it away from the body.
-
Cut the RH rear wheelhouse insulator near the RH body harness to allow for the
removal of the insulator.
-
Remove the RH rear wheelhouse insulator from the vehicle.
Installer
- Cut the RH rear wheelhouse insulator near the RH body harness to allow the harness to be routed into the insulator's opening hole.
-
Install the RH rear wheelhouse insulator to the vehicle.
-
Install the body harness back into position and secure the clip that attaches the
RH body harness to the C-pillar.
-
Secure the clips (x2) that attach the RH body harness on RH side trunk
bulkhead.
- Install the subwoofer. See Caisson des basses (retirez et remplacez).
- Close the liftgate.
- Raise all four windows and close all four doors.