Kanal – Oben – Innenraumeinlass (Ausbauen und Ersetzen)
Korrekturcode
18108402 0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the correction code and its associated FRT reflect all of the
work required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created.
NOTE: See Persönlicher Schutz to make sure wearing proper PPE when
performing the below procedure. NOTE: See for safe and healthy working
practices.
Ausbauen
- Entfernen Sie die hintere Unterhaubenschürze. Siehe Unterhaubenschürze – Hinten (Ausbauen und Ersetzen).
-
Lösen Sie die 4 Clips, mit denen der Innenraumeinlasskanal an der Windlaufgitterverkleidung befestigt ist, und entfernen Sie dann den Kanal aus dem Fahrzeug.
Montieren
Beim Einbauverfahren werden die Schritte des Ausbauverfahrens in umgekehrter Reihenfolge ausgeführt.