2026-11-05
Wheelhouse Insulator - Rear - RH (Remove and Replace)
Korrigeringskode
15300401
15300402
FRT
0.96
MERK: Hvis ikke noe annet er uttrykkelig oppgitt i prosedyren, gjenspeiler korrigeringskoden og dens tilhørende FRT alt arbeidet som kreves for å gjennomføre denne prosedyren, inkludert de tilknyttede prosedyrene. Ikke stable korrigeringskoder med mindre du bli uttrykkelig bedt om det.
MERK: Se for mer informasjon om FRT-er og hvordan de lages.
MERK: Se Personlig beskyttelse for å forsikre deg om at du bruker riktig PVU når du gjennomfører prosedyren nedenfor.
MERK: Se for trygge og sunne arbeidspraksiser.
ADVARSEL
This procedure is a DRAFT.
Although it has been validated, Warnings and Cautions might be missing. Follow safety
requirements and use extreme caution when working on or near High Voltage systems and
components.
- 2026-10-20: Updated the steps of removing the insulator by cutting it open.
- 2025-12-01: Released new procedure.
Fjern
- Open all four doors and lower all four windows.
- Open the liftgate.
- Remove the subwoofer. See Subwoofer (fjerne og skifte ut).
-
Release the clips (x2) that secure the RH body harness to the RH side trunk bulkhead.
-
Release the RH body harness clip from the C-pillar and pull the harness backward to move it away from the body.
-
Cut the RH rear wheelhouse insulator near the RH body harness to allow for the removal of the insulator.
-
Remove the RH rear wheelhouse insulator from the vehicle.
Installer
- Cut the RH rear wheelhouse insulator near the RH body harness to allow the harness to be routed into the insulator's opening hole.
-
Install the RH rear wheelhouse insulator to the vehicle.
-
Install the body harness back into position and secure the clip that attaches the RH body harness to the C-pillar.
-
Secure the clips (x2) that attach the RH body harness on RH side trunk bulkhead.
- Install the subwoofer. See Subwoofer (fjerne og skifte ut).
- Close the liftgate.
- Raise all four windows and close all four doors.