2026-08-09
휠 아치 라이너 - 후면 - LH(구조용 팩 이외)(탈거 및 교체)
교정 코드
12011102 0.24
NOTE: Unless otherwise explicitly
stated in the procedure, the correction code and its associated FRT reflect all of the
work required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. NOTE: See for safe and healthy working
practices.
필요 장비:
- 1133569-00-A 플라이어, 클립 탈거
경고
The video(s)
included in this procedure are meant as an overview for supplemental purposes only.
Follow all of the steps listed in the procedure to avoid damage to components and/or
personal
injury.
- 2023-06-08: 보충 목적 전용으로 전체 절차 비디오를 개요로 추가했습니다.
탈거
장착
장착 절차는 탈거의 역순입니다.