2026-08-09
스트럿 어시스트 - 리프트게이트(탈거 및 교체)
교정 코드
11334402 0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the correction code and its associated FRT reflect all of the
work required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. NOTE: See for safe and healthy working
practices.
필요 장비:
- 1080562-00-A 후드 지지대
탈거
- 리프트게이트를 열고 지지대로 지지합니다.
-
리프트게이트 스트럿의 하단 끝을 차량에 고정되어 있는 볼 스터드에서 분리합니다.
-
리프트게이트 스트럿을 리프트게이트에 고정되어 있는 볼 스터드를 분리한 후 차량에서 스트럿을 탈거합니다.
장착
장착 절차는 탈거의 역순입니다.