Sail Datum Bracket
Correction code:
10102001402
NOTE:
Unless explicitly stated in the procedure, the above
correction code includes all Collision Repair work required
to perform this procedure, including the linked Collision
Repair procedures. Do not stack Collision Repair
correction codes unless explicitly told to do
so. Add any associated mechanical procedures
needed to perform this procedure.
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Parts List
Quantity | Description | Image / Notes |
---|---|---|
2 | Band Edge Clip |
![]() Tesla Part number 1518812-00. |
2 | CBL Tie (Cable Tie) |
![]() Tesla Part number 1015391-00. |
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
-
Remove the clips (shown in red)
securing the wire harness from the Sail Datum Bracket and the Diffuser Bracket.
NoteOnce removed from the Sail Datum Bracket and the Diffuser Bracket, remove the clips from the wire harness.
- Remove the original component.
- Secure each Band Edge Clip (shown in red) to the wire harness using a cable tie.
- Attach the Band Edge Clips (shown in red) to the Rear Under Body.
- Perform any necessary post-repair operations.