Tonneau Attachment Bracket (Upper)
Correction code:
10101811202
10101812502
NOTE:
Unless explicitly stated in the procedure, the above
correction code includes all Collision Repair and Service
repair work required to perform this procedure, including
the linked Collision Repair procedures and linked Service
procedures. Do not stack Collision Repair correction
codes unless explicitly told to do so. Depending
on the damage to the vehicle, additional repairs may be
required.
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | ASSEMBLY - UPPER TONNEAU BRACKET (Tonneau Attachment Bracket – Upper) | |
| 3 | High Strength Structural Rivet, 6.5 mm | |
| 1 | Rivet, 4.8 mm |
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
- Remove the Ramp Bracket - C-Pillar - LH (Remove and Install).
- Remove the Fixed Backlite Glass (Remove and Install).
- Remove the Tonneau Lower Assembly (Remove and Install).
-
Remove the original component.
or Factory Spot Welds
-
Prepare for installation.
or High Strength Structural Rivets, 6.5 mmor Rivets, 4.8 mm
- A = 17 mm.
- Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
- Install the new component or components.
- Perform any necessary post-repair operations.
- Install the Tonneau Lower Assembly (Remove and Install).
- Install the Fixed Backlite Glass (Remove and Install).
- Install the Ramp Bracket - C-Pillar - LH (Remove and Install).