2026-05-12

Panel - Aero Shield - Rear (Remove and Replace)

Correction code 12030502 0.24 NOTA: Salvo explicitamente indicado em contrário no procedimento, o código de correção acima e o FRT refletem todo o trabalho necessário para a realização deste procedimento, incluindo os procedimentos associados. Não acumule códigos de correção, salvo se explicitamente instruído. NOTA: Consulte Tempos de taxa fixa para saber mais sobre FRT e sobre a respetiva criação. NOTA: Consulte Proteção pessoal para garantir que utiliza o EPI adequado durante a realização do procedimento abaixo. NOTA: Consulte para conhecer as práticas seguras e saudáveis de trabalho.

  • 2024-01-04: Updated consumables information.

Torque Specifications

Tabela 1. Torque Specifications: Panel - Aero Shield - Rear (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the rear aero shield panel to the vehicle
5.5 Nm (4.1 lbs-ft)
  • 10 mm socket
 Reuse
Informational PurposesAn informational icon, calling your attention
Nota
Apply threadlocker to the threads of each bolt prior to installation.

Remove

  1. Raise and support the vehicle. See #GUID-A0CF7C9C-B57C-42B3-B8ED-A95758D026E9.
  2. Remove the push clips (x2) located at the LH and RH of the wheel house liner.
  3. Remove the bolts (x9) that attach the rear aero shield panel to the vehicle, and then remove the panel from the vehicle.

Install

  1. Apply a thin bead of threadlocker to the threads of the bolts that attach the rear aero shield panel to the vehicle.
  2. Install the rear aero shield panel to the underside of the vehicle, and then install the bolts that attach the panel to the vehicle.
    5.5 Nm (4.1 lbs-ft)
  3. Install the push clips (x2) located at the LH and RH of the wheel house liner.
  4. Lower the vehicle. See #GUID-A0CF7C9C-B57C-42B3-B8ED-A95758D026E9.