2022-08-18

Panel - Aero Shield - Front (Structural Pack) (Remove and Replace)

Correction code 12030112 0.24 NOTA: Salvo explicitamente indicado em contrário no procedimento, o código de correção acima e o FRT refletem todo o trabalho necessário para a realização deste procedimento, incluindo os procedimentos associados. Não acumule códigos de correção, salvo se explicitamente instruído. NOTA: Consulte Tempos de taxa fixa para saber mais sobre FRT e sobre a respetiva criação. NOTA: Consulte Proteção pessoal para garantir que utiliza o EPI adequado durante a realização do procedimento abaixo. NOTA: Consulte para conhecer as práticas seguras e saudáveis de trabalho.

Torque Specifications

Table 1. Torque Specifications: Panel - Aero Shield - Front (Structural Pack) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Aero shield panel to body nuts
8 Nm (5.9 lbs-ft)
  • 15 mm socket
 Reuse
Aero shield panel to body bolts
6 Nm (4.4 lbs-ft)
  • 10 mm socket
 Reuse

Remove

  1. Raise and support the vehicle. See #GUID-A0CF7C9C-B57C-42B3-B8ED-A95758D026E9.
  2. Remove the clips (x2) and the nuts (x2) that attach the front aero shield panel to the vehicle.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 15 mm socket
  3. Remove the bolts (x12) that attach the front aero shield panel to the vehicle.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 10 mm socket
  4. Lower the aero shield from the front, and then unhook and remove the aero shield from the vehicle.

Install

  1. Apply a thin bead of Loctite 222 to the threads of the bolts (x12) that attach the front aero shield panel to the vehicle.
  2. Install the front aero shield panel to the underside of the vehicle, and then hand-tighten the nuts (x2) to temporarily hold the panel in place.
  3. Hand-tighten the bolts (x12) that attach the front aero shield panel to the vehicle.
  4. Torque the nuts (x2) to the proper specification.
    8 Nm (5.9 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 15 mm socket
  5. Torque the bolts (x12) to the proper specification, and then install the clips (x2).
    6 Nm (4.4 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 10 mm socket
  6. Lower the vehicle. See #GUID-A0CF7C9C-B57C-42B3-B8ED-A95758D026E9.