2026-05-12

Air Extractor - LH (Remove and Replace)

Correction code 18105302 0.30 NOTA: Salvo explicitamente indicado em contrário no procedimento, o código de correção acima e o FRT refletem todo o trabalho necessário para a realização deste procedimento, incluindo os procedimentos associados. Não acumule códigos de correção, salvo se explicitamente instruído. NOTA: Consulte Tempos de taxa fixa para saber mais sobre FRT e sobre a respetiva criação. NOTA: Consulte Proteção pessoal para garantir que utiliza o EPI adequado durante a realização do procedimento abaixo. NOTA: Consulte para conhecer as práticas seguras e saudáveis de trabalho.

Remove

  1. Open all the doors and liftgate.
    Informational PurposesAn informational icon, calling your attention
    Nota
    Latch the rear doors to prevent accidental closing when vehicle is powered down.
  2. Remove the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
  3. Remove the LH lower C-pillar trim. See .
  4. Remove the rear trunk load floor. See .
  5. Remove the front trunk load floor. See .
  6. Remove the LH load floor bracket. See .
  7. Remove the LH trunk side trim. See .
  8. Release the clips that attach the LH air extractor to the vehicle.
  9. Push the LH air extractor into the body panel, and then rotate outward to remove it from the vehicle.

Install

  1. Insert the LH air extractor into the body panel, rotate the extractor into position, and then pull the extractor outwards to the fasten the clips.
  2. Install the LH trunk side trim. See .
  3. Install the LH load floor bracket. See .
  4. Install the front trunk load floor. See .
  5. Install the rear trunk load floor. See .
  6. Install the LH lower C-pillar trim. See .
  7. Install the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
  8. Close all the doors and liftgate.