2026-05-12

Subwoofer (Remove and Replace)

Correction code 21212002 0.42 NOTA: Salvo explicitamente indicado em contrário no procedimento, o código de correção acima e o FRT refletem todo o trabalho necessário para a realização deste procedimento, incluindo os procedimentos associados. Não acumule códigos de correção, salvo se explicitamente instruído. NOTA: Consulte Tempos de taxa fixa para saber mais sobre FRT e sobre a respetiva criação. NOTA: Consulte Proteção pessoal para garantir que utiliza o EPI adequado durante a realização do procedimento abaixo. NOTA: Consulte para conhecer as práticas seguras e saudáveis de trabalho.

Remove

  1. Open all the doors and fully lower all the windows.
  2. Move the driver seat fully forward.
  3. Remove the 2nd row lower cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
  4. Remove the RH lower C-pillar trim. See .
  5. Remove the rear trunk load floor. See .
  6. Remove the front trunk load floor. See .
  7. Remove the trunk sill trim. See .
  8. Remove the RH trunk side trim.
  9. Remove the RH upper C-pillar trim. See .
  10. Remove the nuts and bolt that attach the amplifier to the body, and then carefully set the amplifier aside.
    5.4 Nm (4.0 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 10 mm socket
    • 2 in extension
  11. Disconnect the subwoofer electrical connector.
  12. Remove the nut and bolts that attach the subwoofer to the vehicle, and then remove the subwoofer from the vehicle.
    5.4 Nm (4.0 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 10 mm socket
    • 2 in extension

Install

Installation procedure is the reverse of removal.