Installing the Front License Plate Bracket

  1. Use a trim tool to release the 3 clips at the bottom of the front license plate dummy cover, then remove the cover.
  2. Use a Phillips-head screwdriver to install the front license plate mounting bracket with the 3 supplied screws (you will install the license plate onto this bracket). Tighten the screws to 1 Nm (0.7 ft-lbs).

    Front mounting bracket:

  3. Use a Phillips-head screwdriver to install the license plate with the 4 supplied screws onto the mounting bracket. Tighten the screws to 1 Nm (0.7 ft-lbs).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Do not install the license plate directly onto the dummy cover. Doing so may cause damage or limit camera visibility.