In the unlikely event that a window behaves unexpectedly (fails to open or close properly, goes down more than normal when the door opens, etc.), you can calibrate it to potentially fix the issue.

To calibrate a window:

1. Close the door with the affected window.
2. Sit in the driver's seat and close the driver door.
3. Using the window switch on the driver's door, fully raise the affected window until it stops and stalls.
4. Using the window switch on the driver's door, fully lower the affected window until it stops and stalls.
5. Fully raise the affected window until it stops and stalls again.

If this does not resolve the issue after performing a few times, use your mobile app to schedule a Service appointment.