Grommet - Pump - Windshield Washer (Remove and Replace)
Correction code
1750020412
FRT
0.18
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and its
associated FRT reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are created.
NOTE: See Personal Protection to make
sure you are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy
working practices.
Remove
- Remove the windshield washer pump. See Pump - Windshield Washer (Remove and Replace).
-
Remove the washer pump grommet from the windshield washer reservoir.
Install
-
Install the washer pump grommet to the windshield washer reservoir.
NoteInspect the grommet for damage before installation.
- Install the windshield washer pump. See Pump - Windshield Washer (Remove and Replace).