2026-08-09

LV Battery (Remove and Install)

Correction code 1702010101 FRT 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Torque Specifications

Table 1. Torque Specifications: LV Battery (Remove and Install)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x3) that attach the LV battery to the vehicle
6 Nm (4.4 lbs-ft)
  • 8 mm socket
Reuse

Remove

  1. Open the LH front door and lower the LH front window.
  2. Power off the vehicle from the center display.
  3. Remove the HEPA filter assembly. See HEPA Filter Assembly (Remove and Replace).
  4. Disconnect LV power. See LV Power (Disconnect and Connect) (Modify).
  5. Wait 2 minutes for the electrical system to fully discharge.
  6. Remove the bolts (x3) that attach the LV battery to the vehicle.
    Tip
    Use of the following tool(s) is recommended:
    • 8 mm socket
  7. Remove the LV battery from the vehicle.