2026-05-12

Seatbelt - 2nd Row - LH (Remove and Replace)

Correction code 20056102 0.42 NOTA: Salvo diversa ed esplicita indicazione nella procedura, il codice modifica e il tempo forfettario, o FRT, riflettono tutto il lavoro richiesto per l'esecuzione di questa procedura, incluse le procedure collegate. Non cumulare i codici modifica a meno che non venga detto esplicitamente di farlo. NOTA: Consultare la Tempistica tariffe fisse per saperne di più sui tempi forfettari e su come essi vengono creati. NOTA: Consultare Protezione personale per assicurarsi di indossare i DPI adatti quando si esegue la procedura descritta di seguito. NOTA: Vedere per le pratiche di lavoro in sicurezza.

  • 2024-12-10: Fixed incorrect torque values for retractor to body fastener.

Torque Specifications

Tabella 1. Torque Specifications: Seatbelt - 2nd Row - LH (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the 2nd row LH lower seat belt anchor to the body
35 Nm (25.8 lbs-ft)
  • 15 mm socket
 Replace
Bolt that attaches the seat belt retractor to the body
35 Nm (25.8 lbs-ft)
  • 13 mm socket
 Replace

Remove

  1. Remove the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).
  2. Remove the cabin intake duct. See Duct - Upper - Cabin Intake (Remove and Replace).
  3. Disconnect 12V power. See 12V/LV Power (Disconnect and Connect).
  4. Remove the LH 2nd row seat side bolster. See Bolster - Side - Seat - 2nd Row - LH (Remove and Replace).
  5. Remove the LH side rail trim. See #GUID-F7357289-0632-4B38-A804-58B999076AE1.
  6. Remove the LH upper C-pillar trim. See #GUID-CA7062E0-67B6-4F6E-8E04-41149EBDB913.
  7. Remove the LH rear C-pillar trim. See Trim - C-Pillar - Rear - LH (Remove and Replace).
  8. Remove and discard the bolt that attaches the 2nd row LH lower seat belt anchor to the body.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 15 mm socket
  9. Release the clips (x2) that attach the bezel to the LH rear upper C-pillar trim, and then slide the bezel off the seat belt.
  10. Guide the seat belt through the LH rear upper C-pillar trim, and the remove the trim from the vehicle.
  11. Disconnect the electrical connector from the 2nd row LH seat belt retractor.
  12. Remove and discard the bolt that attaches the 2nd row LH seat belt retractor to the body, and then remove the retractor from the vehicle.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 13 mm socket

Install

  1. Install the 2nd row LH seat belt retractor to the body, and then install a new bolt to attach the retractor to the body.
    35 Nm (25.8 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 13 mm socket
  2. Connect the electrical connector to the 2nd row LH seat belt retractor.
  3. Install the bezel onto the seat belt, and then attach the clips (x2) to the LH rear upper C-pillar trim.
  4. Install a new bolt that attaches the 2nd row LH lower seat belt anchor to the body.
    35 Nm (25.8 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 15 mm socket
  5. Install the LH rear C-pillar trim. See Trim - C-Pillar - Rear - LH (Remove and Replace).
  6. Install the LH upper C-pillar trim. See #GUID-CA7062E0-67B6-4F6E-8E04-41149EBDB913.
  7. Install the LH side rail trim. See #GUID-F7357289-0632-4B38-A804-58B999076AE1.
  8. Install the LH 2nd row seat side bolster. See Bolster - Side - Seat - 2nd Row - LH (Remove and Replace).
  9. Connect 12V power. See 12V/LV Power (Disconnect and Connect).
  10. Install the cabin intake duct. See Duct - Upper - Cabin Intake (Remove and Replace).
  11. Install the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).