2026-05-12

Trim - C-Pillar - Rear - LH (Remove and Replace)

Correction code 15185102 0.24 NOTA: Salvo diversa ed esplicita indicazione nella procedura, il codice modifica e il tempo forfettario, o FRT, riflettono tutto il lavoro richiesto per l'esecuzione di questa procedura, incluse le procedure collegate. Non cumulare i codici modifica a meno che non venga detto esplicitamente di farlo. NOTA: Consultare la Tempistica tariffe fisse per saperne di più sui tempi forfettari e su come essi vengono creati. NOTA: Consultare Protezione personale per assicurarsi di indossare i DPI adatti quando si esegue la procedura descritta di seguito. NOTA: Vedere per le pratiche di lavoro in sicurezza.

Remove

  1. Remove the LH 2nd row seat side bolster. See Bolster - Side - Seat - 2nd Row - LH (Remove and Replace).
  2. Remove the LH side rail trim. See #GUID-F7357289-0632-4B38-A804-58B999076AE1.
  3. Remove the LH upper C-pillar trim. See #GUID-CA7062E0-67B6-4F6E-8E04-41149EBDB913.
  4. Release the clip and tabs that attach the LH rear C-pillar trim to the body, and then set the trim aside.
  5. Remove and discard the bolt that attaches the lower seatbelt anchor to the vehicle.
  6. Release the bezel clips that attach the seatbelt bezel to the LH rear C-pillar trim, and then slide the bezel off of the seatbelt.
  7. Move the seatbelt through the LH rear C-pillar trim, and then remove the trim from the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Note
    Remove any remaining LH rear C-pillar trim clips from the LH C-pillar, and if the LH rear C-pillar trim is to be later installed, remove all clips from the trim.

Install

  1. If reusing the same LH rear C-pillar trim, install new clips onto the trim.
  2. Move the seatbelt through the LH rear C-pillar trim.
  3. Slide the seatbelt bezel onto the seat belt, and then fasten the bezel clips that attach the seatbelt bezel to the LH rear C-pillar trim.
  4. Install a new bolt to attach the lower seatbelt anchor to the vehicle.
    30 Nm (22.1 lbs-ft)
  5. Slide the rearmost tabs of the LH rear C-pillar trim into the body first, push the frontmost tabs toward the rear, and then fasten the clip and tabs that attach the LH rear C-pillar trim to the body.
  6. Install the LH upper C-pillar trim. See #GUID-CA7062E0-67B6-4F6E-8E04-41149EBDB913.
  7. Install the LH side rail trim. See #GUID-F7357289-0632-4B38-A804-58B999076AE1.
  8. Install the LH 2nd row seat side bolster. See Bolster - Side - Seat - 2nd Row - LH (Remove and Replace).
  9. Install the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).