2026-05-12

Bracket - Rear - Center (Remove and Replace)

Correction code 10014302 1.08 NOTA: Salvo diversa ed esplicita indicazione nella procedura, il codice modifica e il tempo forfettario, o FRT, riflettono tutto il lavoro richiesto per l'esecuzione di questa procedura, incluse le procedure collegate. Non cumulare i codici modifica a meno che non venga detto esplicitamente di farlo. NOTA: Consultare la Tempistica tariffe fisse per saperne di più sui tempi forfettari e su come essi vengono creati. NOTA: Consultare Protezione personale per assicurarsi di indossare i DPI adatti quando si esegue la procedura descritta di seguito. NOTA: Vedere per le pratiche di lavoro in sicurezza.

Torque Specifications

Tabella 1. Torque Specifications: Bracket - Rear - Center (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts that attach the rear center bracket to the body
4 Nm (2.9 lbs-ft)
  • 10 mm socket
 Reuse

Remove

  1. Remove the rear fascia. See Fascia - Rear (Remove and Install).
  2. Disconnect the electrical wiring harness connector from the rear Bluetooth passive entry module.
  3. Remove the bolt and release the clip that attach the Bluetooth passive entry module to the body, and then remove the module from the bracket.
    Informational PurposesAn informational icon, calling your attention
    Note
    Use of the following tool(s) is recommended:
    • T30 socket
    • 2 in extension
  4. Release the clips that attach the electrical harness to the rear center bracket assembly.
    Informational PurposesAn informational icon, calling your attention
    Note
    The end clip is hidden by the electrical connector.
  5. Remove the bolts that attach the rear center bracket to the body.
    Informational PurposesAn informational icon, calling your attention
    Note
    Use of the following tool(s) is recommended:
    • 10 mm socket
    • 4 in extension
  6. Remove the rear center bracket from the vehicle.

Install

  1. Install the bolts that attach the rear center bracket to the body.
    4 Nm (2.9 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    Note
    Use of the following tool(s) is recommended:
    • 10 mm socket
    • 4 in extension
  2. Install the clips that attach the rear Bluetooth passive entry antenna electrical harness to the rear center bracket.
  3. Install the bolt that attaches the Bluetooth passive entry module to the body.
    3.5 Nm (2.6 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    Note
    Use of the following tool(s) is recommended:
    • T30 socket
    • 2 in extension
  4. Connect the electrical wiring harness connector to the rear Bluetooth passive entry module.
  5. Install the rear fascia. See Fascia - Rear (Remove and Install).