2026-05-12

Seat Back - 2nd Row - RH (Remove and Replace)

Correction code 13054102 0.18 NOTA: Salvo diversa ed esplicita indicazione nella procedura, il codice modifica e il tempo forfettario, o FRT, riflettono tutto il lavoro richiesto per l'esecuzione di questa procedura, incluse le procedure collegate. Non cumulare i codici modifica a meno che non venga detto esplicitamente di farlo. NOTA: Consultare la Tempistica tariffe fisse per saperne di più sui tempi forfettari e su come essi vengono creati. NOTA: Consultare Protezione personale per assicurarsi di indossare i DPI adatti quando si esegue la procedura descritta di seguito. NOTA: Vedere per le pratiche di lavoro in sicurezza.

Torque Specifications

Tabella 1. Torque Specifications: Seat Back - 2nd Row - RH (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Nut that attaches the RH seat back hinge bracket to the vehicle
18 Nm (13.3 lbs-ft)
  • 13 mm socket
Reuse

Remove

  1. Remove the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
  2. Remove the RH 2nd row seat side bolster. See Bolster - Side - Seat - 2nd Row - LH (Remove and Replace).
  3. Release the clips that attach the bolster bracket, and the remove the bracket from the vehicle.
  4. Disconnect the electrical harness from the heated seat connector for the RH 2nd row seat back, if equipped.
  5. Remove the nuts that attach the RH seat back hinge bracket to the body.
    18 Nm (13.3 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    Note
    Use of the following tool(s) is recommended:
    • 13 mm socket
  6. Lift the right side of the RH seat back assembly up, move forward and to the right, and pull the inner pivot out of the LH seat back assembly.
  7. Remove the RH 2nd row seat back from the vehicle.

Install

Installation procedure is the reverse of removal.