2026-05-12

Seat Cushion - Lower - 2nd Row (Remove and Replace)

Correction code 13051002 0.12 NOTA: Salvo diversa ed esplicita indicazione nella procedura, il codice modifica e il tempo forfettario, o FRT, riflettono tutto il lavoro richiesto per l'esecuzione di questa procedura, incluse le procedure collegate. Non cumulare i codici modifica a meno che non venga detto esplicitamente di farlo. NOTA: Consultare la Tempistica tariffe fisse per saperne di più sui tempi forfettari e su come essi vengono creati. NOTA: Consultare Protezione personale per assicurarsi di indossare i DPI adatti quando si esegue la procedura descritta di seguito. NOTA: Vedere per le pratiche di lavoro in sicurezza.

Remove

  1. Move the driver seat and the front passenger seat fully forward.
    Informational PurposesAn informational icon, calling your attention
    Note
    Note the position of the driver seat and the front passenger seat prior to movement so that both seats are restored to their original position during installation.
  2. While pressing the LH and RH tabs towards the LH side of the vehicle, lift the front edge of the seat cushion.
  3. Disconnect the electrical connectors on each end of the seat cushion, and then remove the seat cushion from the vehicle.
  4. Inspect the ancillary bay probe lid cover on the ancillary bay for the presence of a breather.
  5. If the breather is missing, install one now.
    Informational PurposesAn informational icon, calling your attention
    Note
    After installing the breather, if necessary, return to the procedure that required removal of the 2nd row lower seat cushion.

Install

  1. Position the seat cushion in the vehicle.
  2. Connect the electrical connectors on each side of the seat cushion.
  3. Insert the seat belt buckles through the seat cushion holes.
  4. Slide the seat cushion inward, align the front guide tabs to the locking tabs, and then push the seat cushion into the tabs.
  5. Make sure that the seat cushion is fully seated with a push and pull test near the tabs.
  6. Move the driver seat and the front passenger seat to their original position.