Current Release Notes

Archived Release Notes:

Week Ending January 25, 2025

The following procedure(s) were updated:
  1. A/C Refrigerant Flush Due To Compressor Failure (Dual Motor) (Europe) - Added Note on separately adding correction code 18200102 and condensed procedure.
  2. A/C Refrigerant Flush Due To Compressor Failure (Dual Motor) (NA) - Added Note on separately adding correction code 18200102 as a separate activity to the Service Visit.
  3. Evaporator (1st Generation) (Remove and Replace) - Added Note on separately adding correction code 18200102 and condensed procedure.
  4. HV Battery (RWD/AWD) (Remove and Replace) - Added step to determine if HV battery parameters are within safe limits before removing the pyro disconnect. Added pyro disconnect removal step.

Week Ending January 18, 2025

The following new procedure(s) were added:
  1. Compressor and Condenser Pair (Remove and Replace)
The following procedure(s) were updated:
  1. Door - Charge Port (Remove and Replace) - Added the way to perform Charge Port Door Calibration routine and Charge Port Latch Calibration routine by using the touchscreen.
  2. Evaporator (2nd Generation) (Remove and Replace) - Added Note on separately adding correction code 18200102 and inserted cross references to nested procedures.
  3. Harness - Trunk - Front (Remove and Replace) - Added note on separately adding correction code 18200102 for A/C refrigerant recovery and recharge.
  4. Insulator - Dash - Interior - RH (Remove & Replace) - Added note on separately adding correction code 18200102 for A/C refrigerant recovery and recharge.

Week Ending January 11, 2025

The following new procedure(s) were added:
  1. GUID-AA705D59-4529-40CC-AAB6-FFCD81B61A5D.html - Heat exchanger procedure for "Raven" front drive units.
The following procedure(s) were updated:
  1. Receiver Dryer and Desiccant (Remove and Replace) - Added note to add correction code 18200102 as a separate activity to the Service Visit.