2026-05-12

Hinge - Power Trunk - LH (Remove and Replace)

Correction code 11332602 0.30 NOTA: Salvo diversa ed esplicita indicazione nella procedura, il codice modifica e il tempo forfettario, o FRT, riflettono tutto il lavoro richiesto per l'esecuzione di questa procedura, incluse le procedure collegate. Non cumulare i codici modifica a meno che non venga detto esplicitamente di farlo. NOTA: Consultare la Tempistica tariffe fisse per saperne di più sui tempi forfettari e su come essi vengono creati. NOTA: Consultare Protezione personale per assicurarsi di indossare i DPI adatti quando si esegue la procedura descritta di seguito. NOTA: Vedere per le pratiche di lavoro in sicurezza.

Torque Specifications

Tabella 1. Torque Specifications: Hinge - Power Trunk - LH (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the power trunk hinge to the trunk lid
24 Nm (17.7 lbs-ft)
  • 13 mm socket
 Reuse
Nut that attaches the power trunk hinge to the body
24 Nm (17.7 lbs-ft)
  • 13 mm socket
 Reuse

Remove

  1. Remove the trunk power strut. See .
  2. Apply masking tape on the trunk lid and body of the vehicle to mark the position of the currently installed power trunk hinge.
  3. With assistance, remove the bolts (x2) that attach the trunk power hinge to the trunk lid.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 13 mm socket
  4. Remove the nuts (x2) that attach the power trunk hinge to the body, and then remove the hinge from the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Note
    Use of the following tool(s) is recommended:
    • 13 mm socket

Install

  1. Position the new power trunk hinge on the vehicle, and then install the nuts (x2) that attach the power trunk hinge to the vehicle.
    24 Nm (17.7 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    Note
    Align the hinge with the masking tape on the body.
    Informational PurposesAn informational icon, calling your attention
    Note
    Use of the following tool(s) is recommended:
    • 13 mm socket
  2. With assistance, hand-tighten the bolts (x2) that attach the trunk power hinge to the trunk lid.
    Informational PurposesAn informational icon, calling your attention
    Note
    Align the hinge with the masking tape on the trunk lid.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 13 mm socket
  3. Remove the masking tape from the vehicle.
  4. Install the trunk power strut and trunk garnish. See .
  5. Close the trunk, and then check trunk gap and flush.
    Informational PurposesAn informational icon, calling your attention
    Note
    If necessary, adjust the hinge bolts and trunk latch to modify the trunk lid gap/flush. Assistance is recommended.
  6. When trunk lid gap/flush is finalized, open the trunk and torque the bolts that attach the power trunk hinge to the trunk lid.
    24 Nm (17.7 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 13 mm socket
  7. If necessary, apply touch-up paint to the trunk hinge bolt heads.
    Informational PurposesAn informational icon, calling your attention
    Note
    Shake the paint container before applying paint.