2026-05-12

Drop Link - Stabilizer Bar - Rear - LH (Remove and Replace)

Correction code 31033402 0.36 NOTA: Salvo diversa ed esplicita indicazione nella procedura, il codice modifica e il tempo forfettario, o FRT, riflettono tutto il lavoro richiesto per l'esecuzione di questa procedura, incluse le procedure collegate. Non cumulare i codici modifica a meno che non venga detto esplicitamente di farlo. NOTA: Consultare la Tempistica tariffe fisse per saperne di più sui tempi forfettari e su come essi vengono creati. NOTA: Consultare Protezione personale per assicurarsi di indossare i DPI adatti quando si esegue la procedura descritta di seguito. NOTA: Vedere per le pratiche di lavoro in sicurezza.

    Torque Specifications

    Remove

    1. Remove the mid aero shield. See Panel - Aero Shield - Rear (Remove and Replace).
    2. Remove and discard the nuts that attach the LH drop link to the rear stabilizer bar and rear LH knuckle.
      55 Nm (40.6 lbs-ft)
      Informational PurposesAn informational icon, calling your attention
      TIp
      Use of the following tool(s) is recommended:
      • 5 mm hex
      • 15 mm combination flex head wrench
      • 15 mm socket
      • Flex head ratchet/flex head torque wrench
    3. Remove the drop link from the vehicle.

    Install

    Installation procedure is the reverse of removal, except for the following:

    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Sostituire tutti i dadi Nyloc.
    • Mark nuts with paint pen after install.