Subwoofer (Remove and Replace)
Correction code
21212002
0.36
NOTA: Salvo diversa ed esplicita indicazione nella procedura, il codice modifica e il tempo forfettario, o FRT, riflettono tutto il lavoro richiesto per l'esecuzione di questa procedura, incluse le procedure collegate. Non cumulare i codici modifica a meno che non venga detto esplicitamente di farlo.
NOTA: Consultare la Tempistica tariffe fisse per saperne di più sui tempi forfettari e su come essi vengono creati.
NOTA: Consultare Protezione personale per assicurarsi di indossare i DPI adatti quando si esegue la procedura descritta di seguito. NOTA: Vedere per le pratiche di lavoro in sicurezza.
Remove
- Open the liftgate.
- Disconnect 12V power. See 12V/LV Power (Disconnect and Connect).
- Remove the trunk sill trim. See Trim - Sill - Trunk (Remove and Replace).
- Remove the upper trunk garnish. See Garnish - Trunk (Remove and Replace).
-
Remove the clip that attaches the RH trunk side trim to the body.
-
Fold back the RH trunk side trim until the bolt that attaches the subwoofer
can be removed..
- Disconnect the RH trunk side trim puddle lamp connector.
- Disconnect the subwoofer connector (x1).
-
Disconnect the amplifier
connectors (x3).
CAUTIONMake sure 12V power is disconnected before disconnecting the electrical connectors. Failure to disconnect 12V power before removal can result in damage.
-
Release the clips that
attach the electrical harness to the subwoofer.
-
Remove the bolt that attaches the amplifier harness to the body.
-
Remove the bolt and nuts
that attach the subwoofer to the body, and then remove the subwoofer
amplifier assembly from the vehicle.
5.4 Nm (4.0 lbs-ft)
5.4 Nm (4.0 lbs-ft) -
Remove the bolts that attach the amplifier to the subwoofer, and then
install the bolts that attach the amplifier to the new subwoofer.
4.3 Nm (3.2 lbs-ft)
Install
Installation procedure is the reverse of removal.