2026-05-12

Bracket - Active Hood Strut - LH (Remove and Replace)

Correction code 11330012 0.42 NOTA: Salvo diversa ed esplicita indicazione nella procedura, il codice modifica e il tempo forfettario, o FRT, riflettono tutto il lavoro richiesto per l'esecuzione di questa procedura, incluse le procedure collegate. Non cumulare i codici modifica a meno che non venga detto esplicitamente di farlo. NOTA: Consultare la Tempistica tariffe fisse per saperne di più sui tempi forfettari e su come essi vengono creati. NOTA: Consultare Protezione personale per assicurarsi di indossare i DPI adatti quando si esegue la procedura descritta di seguito. NOTA: Vedere per le pratiche di lavoro in sicurezza.

Torque Specifications

Tabella 1. Torque Specifications: Bracket - Active Hood Strut - LH (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the strut bracket to the wheel arch, from inside the wheel arch.
13 Nm (9.6 lbs-ft)
  • 10 mm socket
 Reuse
Bolt that attaches the strut bracket to the wheel arch, from on top of the bracket.
10 Nm (7.4 lbs-ft)
  • 6 mm hex
 Reuse

Remove

  1. Remove the actuator. See #GUID-CD99A708-E79A-42A4-B0C8-45B87FD305AA.
  2. Use a small flat head screwdriver to release the clip that attaches the gas strut to the LH active hood strut bracket, and then remove the strut from the bracket.
  3. Remove the bolt that attaches the LH active hood strut bracket to the body, from inside the wheel arch.
    Informational PurposesAn informational icon, calling your attention
    Note
    Use of the following tool(s) is recommended:
    • 10 mm socket
  4. Remove the bolts (x2) that attach the strut bracket to the body, from on top of the bracket, and then remove the bracket from the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Note
    Use of the following tool(s) is recommended:
    • 6 mm hex

Install

  1. Install the LH active hood strut bracket to the boday, and then installl the bolt attaches the bracket to the body, to on top of the bracket.
    13 Nm (9.6 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    Note
    Use of the following tool(s) is recommended:
    • 10 mm socket
  2. Install the bolt that attaches the LH passive hood strut bracket to the body, from inside the wheel arch.
    10 Nm (7.4 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    Note
    Use of the following tool(s) is recommended:
    • 6 mm hex
  3. Install the strut to the LH active hood strut bracket, and then use a small flat head screwdriver to fasten the clip that attaches the strut to the bracket.
  4. Install the actuator. See #GUID-CD99A708-E79A-42A4-B0C8-45B87FD305AA.