2026-05-12

Diffuser - Rear Fascia (Remove and Replace)

Correction code 12030802 0.24 NOTA: Salvo diversa ed esplicita indicazione nella procedura, il codice modifica e il tempo forfettario, o FRT, riflettono tutto il lavoro richiesto per l'esecuzione di questa procedura, incluse le procedure collegate. Non cumulare i codici modifica a meno che non venga detto esplicitamente di farlo. NOTA: Consultare la Tempistica tariffe fisse per saperne di più sui tempi forfettari e su come essi vengono creati. NOTA: Consultare Protezione personale per assicurarsi di indossare i DPI adatti quando si esegue la procedura descritta di seguito. NOTA: Vedere per le pratiche di lavoro in sicurezza.

Torque Specifications

Tabella 1. Torque Specifications: Diffuser - Rear Fascia (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts that attach the rear fascia diffuser to the vehicle
4 Nm (2.9 lbs-ft)
  • 10 mm socket
 Reuse
Bolts that attach the rear fascia diffuser to the outer edge of the rear fascia
3 Nm (2.2 lbs-ft)
  • 10 mm socket
 Reuse
Bolts that attach the rear fascia diffuser to the inside of the rear fascia
3 Nm (2.2 lbs-ft)
  • 10 mm socket
 Reuse

Remove

  1. Raise and support the vehicle. See Raise Vehicle - 2 Post Lift.
  2. Remove the clips that attach the rear portion of the LH and RH rear wheel liners to the body.
  3. Remove the mid aero shield panel. See Panel - Aero Shield - Rear (Remove and Replace).
  4. Remove the fastener covers, and then remove the bolts that attach the rear fascia diffuser to the vehicle.
    4 Nm (2.9 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    Note
    Newer vehicles are not equipped with the front, middle bolt.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 10 mm socket
  5. Remove the bolts that attach the rear fascia diffuser to the outer edge of the rear fascia.
    3 Nm (2.2 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 10 mm socket
  6. Remove the bolts that attach the rear fascia diffuser to the inside of the rear fascia.
    3 Nm (2.2 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    Note
    Reach into the loosened rear fascia diffuser to access these bolts.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 10 mm socket
  7. Release the tabs that attach the rear fascia diffuser to the rear fascia, and then remove the diffuser.

Install

Installation procedure is the reverse of removal.