2026-05-12

Adjustable Top Loop (Remove and Replace)

Correction code 20051002 0.12 NOTA: Salvo diversa ed esplicita indicazione nella procedura, il codice modifica e il tempo forfettario, o FRT, riflettono tutto il lavoro richiesto per l'esecuzione di questa procedura, incluse le procedure collegate. Non cumulare i codici modifica a meno che non venga detto esplicitamente di farlo. NOTA: Consultare la Tempistica tariffe fisse per saperne di più sui tempi forfettari e su come essi vengono creati. NOTA: Consultare Protezione personale per assicurarsi di indossare i DPI adatti quando si esegue la procedura descritta di seguito. NOTA: Vedere per le pratiche di lavoro in sicurezza.

Torque Specifications

Tabella 1. Torque Specifications: Adjustable Top Loop (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Patch bolt that attaches the upper D-ring to adjustable top loop
30 Nm (22.1 lbs-ft)
  • Torx T50 socket
 Replace
Bolt that attaches the adjustable top loop to the B-pillar
20 Nm (14.7 lbs-ft)
  • Torx T47 socket
 Replace
Bolt securing LH upper D-ring to B-pillar
30 Nm (22.1 lbs-ft)
  • Torx T50 socket
 Replace

Remove

  1. Open both LH doors and lower both LH windows.
  2. Move the LH front seat fully forward.
  3. Release the clips that attach the LH upper B-pillar trim to the vehicle.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Release the clips at the bottom of the LH upper B-pillar trim first, and then release the clips at the top of the trim.
  4. Set the LH upper B-pillar trim aside.
  5. Remove and discard the patchbolt that attaches the upper D-ring to the B-pillar.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Torx T50 socket
  6. Remove the bolt that attaches the adjustable top loop to the B-pillar.
    Informational PurposesAn informational icon, calling your attention
    Note
    The patchbolt is permanently attached to the adjustable top loop.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Torx T47 socket
  7. Pull the top of the adjustable top loop away from the B-pillar, and then slide upwards to remove the adjustable top loop from the vehicle.

Install

  1. Position the adjustable top loop on the B-pillar, and then install the new patchbolt that attaches the adjustable top loop to the B-pillar.
    20 Nm (14.7 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Torx T47 socket
  2. Install the new patchbolt that attaches the upper D-ring to the B-pillar.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Torx T50 socket
  3. Lower the adjustable top loop to align it with the LH upper B-pillar trim.
  4. Insert the top portion of the LH upper B-pillar trim under the headliner to align the clips, and then press the bottom of the trim to fully engage all of the clips.
    Informational PurposesAn informational icon, calling your attention
    Note
    Make sure the rubber door seals completely overlap the trim.