2026-05-12

Sensor - Ride Height - Rear - LH (Remove and Replace)

Correction code 31036102 0.18 NOTA: Salvo diversa ed esplicita indicazione nella procedura, il codice modifica e il tempo forfettario, o FRT, riflettono tutto il lavoro richiesto per l'esecuzione di questa procedura, incluse le procedure collegate. Non cumulare i codici modifica a meno che non venga detto esplicitamente di farlo. NOTA: Consultare la Tempistica tariffe fisse per saperne di più sui tempi forfettari e su come essi vengono creati. NOTA: Consultare Protezione personale per assicurarsi di indossare i DPI adatti quando si esegue la procedura descritta di seguito. NOTA: Vedere per le pratiche di lavoro in sicurezza.

Torque Specifications

Tabella 1. Torque Specifications: Sensor - Ride Height - Rear - LH (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Nut that attaches the LH rear ride height sensor to the LH rear upper aft link
10 Nm (7.4 lbs-ft)
  • 10 mm deep socket
Reuse
Nut that attaches the LH rear ride height sensor to the rear subframe
10 Nm (7.4 lbs-ft)
  • 10 mm deep socket
Reuse

Remove

  1. Raise and support the vehicle. See Raise Vehicle - 2 Post Lift.
  2. Remove the LH rear wheel. See .
  3. Remove the nut that attaches the LH rear ride height sensor to the LH rear upper aft link.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 10 mm deep socket
  4. Remove the nut that attaches the LH rear ride height sensor to the rear subframe.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 10 mm deep socket
  5. Disconnect the electrical connector from the LH rear ride height sensor, and then remove the sensor from the vehicle.

Install

  1. Connect the electrical connector to the LH rear ride height sensor.
  2. Install the nut that attaches the LH rear ride height sensor to the rear subframe.
    10 Nm (7.4 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 10 mm deep socket
  3. Install the nut that attaches the LH rear ride height sensor to the LH rear upper aft link.
    10 Nm (7.4 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 10 mm deep socket
  4. Install the LH rear wheel. See .
  5. Remove the vehicle from the lift.