2026-05-15

Front Door Outer Panel

교정 코드: 10100500602 10100500502 메모: 절차에서 명시적으로 언급하지 않는 한 위 교정 코드는 연결된 사고 수리 절차 및 연결된 차량 정비 절차를 포함하여 이 절차를 수행하는 데 필요한 모든 사고 수리 및 차량 정비 수리 작업을 반영합니다. 명시적으로 지시하지 않는 한 사고 수리 교정 코드를 누적하지 마십시오. 차량 손상 정도에 따라 추가 수리가 필요할 수 있습니다.

부품 목록

수량 설명 이미지/비고
1 PANEL - FRONT DOOR (Front Door Outer Panel)
2 (per door panel) BUTYL FOIL, 480X240, 2MM THICK

부품을 주문할 때 부품 카탈로그를 참조하고 수리할 차량의 VIN을 입력하여 차량에 적합한 부품(및 부품 번호)을 찾습니다. 또는 부품 카탈로그에서 검색 기능을 사용하여 차량의 해당 부품을 찾습니다.

수리 절차

  1. 다음을 탈거합니다. Mirror - Door - LH (Remove and Replace).
  2. 다음을 탈거합니다. Handle - Exterior Release - Door - Front - LH (Remove and Replace).
  3. 다음을 탈거합니다. Window Regulator (Recalibrate).
  4. 다음을 탈거합니다. Door - Front - LH (Remove and Install).
  5. Separate the hemmed flange.
  6. 장착을 준비합니다.
  7. Apply anti-flutter foam and butyl patches as needed to match the original configuration, and use an approved structural adhesive to secure the hemmed flange.
    Informational PurposesAn informational icon, calling your attention
    Note
    Refer to 승인된 화학 물질 for a list of approved foam products and structural adhesives.
  8. 새 구성품을 장착합니다.
  9. Fold over the hemmed flange.
  10. 필요한 수리 후 작업을 수행합니다.
  11. 다음을 장착합니다. Door - Front - LH (Remove and Install).
  12. 다음을 장착합니다. Window Regulator (Recalibrate).
  13. 다음을 장착합니다. Handle - Exterior Release - Door - Front - LH (Remove and Replace).
  14. 다음을 장착합니다. Mirror - Door - LH (Remove and Replace).