2026-05-12

Trim - A-Pillar - Middle - LH (Remove and Replace)

Correction code 15182602 0.06 NOTA: Salvo diversa ed esplicita indicazione nella procedura, il codice modifica e il tempo forfettario, o FRT, riflettono tutto il lavoro richiesto per l'esecuzione di questa procedura, incluse le procedure collegate. Non cumulare i codici modifica a meno che non venga detto esplicitamente di farlo. NOTA: Consultare la Tempistica tariffe fisse per saperne di più sui tempi forfettari e su come essi vengono creati. NOTA: Consultare Protezione personale per assicurarsi di indossare i DPI adatti quando si esegue la procedura descritta di seguito. NOTA: Vedere per le pratiche di lavoro in sicurezza.

Remove

  1. Remove the LH instrument panel end cap. See End Cap - Instrument Panel - LH (Remove and Replace).
  2. Release the upper clip that attaches the LH middle A-Pillar trim to the vehicle, and then pull the trim upwards to remove it from the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Note
    Remove any remaining LH middle A-pillar trim clips from the LH A-pillar, and if the LH middle A-pillar trim is to be later installed, remove the clip from the trim.

Install

  1. If reusing the same LH middle A-pillar trim, install a new clip onto the trim.
  2. Align the bottom tab, and then push the top clip to fully seat the LH middle A-pillar trim.
    Informational PurposesAn informational icon, calling your attention
    Note
    Make sure that the door seal is on top of the trim.
  3. Install the LH instrument panel end cap. See End Cap - Instrument Panel - LH (Remove and Replace).