Crush Can - Front Subframe - LH (Remove and Replace)
Correction code
10101602
0.72
NOTA: Salvo diversa ed esplicita indicazione nella procedura, il codice modifica e il tempo forfettario, o FRT, riflettono tutto il lavoro richiesto per l'esecuzione di questa procedura, incluse le procedure collegate. Non cumulare i codici modifica a meno che non venga detto esplicitamente di farlo.
NOTA: Consultare la Tempistica tariffe fisse per saperne di più sui tempi forfettari e su come essi vengono creati.
NOTA: Consultare Protezione personale per assicurarsi di indossare i DPI adatti quando si esegue la procedura descritta di seguito. NOTA: Vedere per le pratiche di lavoro in sicurezza.
Apparecchiatura:
- 1133185-00-A Skt, 3/8in Dr, XZN M14, Tri-Square
Remove
- Remove the front end carrier. See Carrier - Front End (Non-Heat Pump) (Remove and Replace) or Carrier - Front End (Heat Pump) (Remove and Replace).
-
Remove the bolts that attach
the LH crash can bracket to the front subframe, and remove the bracket from
the subframe.
53 Nm (39.1 lbs-ft)
Install
Installation procedure is the reverse of removal.