2026-05-12

Center Console (2.0) (Remove and Install)

Correction code 15190111 0.30 NOTA: Salvo diversa ed esplicita indicazione nella procedura, il codice modifica e il tempo forfettario, o FRT, riflettono tutto il lavoro richiesto per l'esecuzione di questa procedura, incluse le procedure collegate. Non cumulare i codici modifica a meno che non venga detto esplicitamente di farlo. NOTA: Consultare la Tempistica tariffe fisse per saperne di più sui tempi forfettari e su come essi vengono creati. NOTA: Consultare Protezione personale per assicurarsi di indossare i DPI adatti quando si esegue la procedura descritta di seguito. NOTA: Vedere per le pratiche di lavoro in sicurezza.

Remove

  1. Open all the doors and lower all the windows.
  2. Move the driver seat rearward.
  3. Remove the driver floormat.
  4. Remove the LH center console side panel carpet. See Side Panel - Center Console - LH (Remove and Replace).
  5. Remove the bolts that attach the LH front of the center console to the body.
    Informational PurposesAn informational icon, calling your attention
    Nota
    Use of the following tool(s) is recommended:
    • 10 mm socket
  6. Remove the center console lower rear panel. See Panel - Lower Rear - Center Console (Remove and Replace).
  7. Remove the bolt that attaches the LH rear of the center console to the body.
    Informational PurposesAn informational icon, calling your attention
    Nota
    Use of the following tool(s) is recommended:
    • 10 mm socket
  8. Remove the bolt that attaches the RH rear of the center console to the body.
    Informational PurposesAn informational icon, calling your attention
    Nota
    Use of the following tool(s) is recommended:
    • 10 mm socket
  9. Move the front passenger seat backward and the seat back to the down position.
  10. Remove the front passenger floor mat.
  11. Remove the RH center console side panel carpet. See Side Panel - Center Console - LH (Remove and Replace).
  12. Remove the bolts that attach the RH front of the center console to the body.
    Informational PurposesAn informational icon, calling your attention
    Nota
    Use of the following tool(s) is recommended:
    • 10 mm socket
  13. Disconnect 12V power. See 12V/LV Power (Disconnect and Connect).
  14. Disconnect the electrical connector from the rear of the center console.
  15. Disconnect the electrical connector that is located at the RH front of the center console.
  16. With an assistant, remove the center console from the vehicle as follows:
    1. Tilt the rear of the center console upwards.
    2. Pull the center console towards the rear of the vehicle.
    3. Tilt the front of the center console upwards.
    4. Remove the center console through the passenger front door.

Install

  1. With an assistant, install the center console into the vehicle as follows:
    1. Tilt the front of the center console downwards.
    2. Slide the center console towards the front of the vehicle.
    3. Tilt the rear of the center console downwards until it is in place.
  2. Connect the electrical connector that is located at the RH front of the center console.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Avvertenza
    Ensure the connector is properly installed. Perform a push-pull test before continuing this procedure.
  3. Connect the electrical connector in the rear of the center console.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Avvertenza
    Ensure the connector is properly installed. Perform a push-pull test before continuing this procedure.
  4. Reconnect 12V power. See 12V/LV Power (Disconnect and Connect).
  5. Install the bolt that attaches the RH rear of the center console to the body.
    7 Nm (5.2 lbs-ft)
  6. Install the bolt that attaches the LH rear of the center console to the body.
    7 Nm (5.2 lbs-ft)
  7. Install the center console lower rear panel. See Panel - Lower Rear - Center Console (Remove and Replace).
  8. Install the bolts that attach the RH front of the center console to the body.
    7 Nm (5.2 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    Nota
    Use of the following tool(s) is recommended:
    • 10 mm socket
  9. Install the RH center console side panel carpet. See Side Panel - Center Console - LH (Remove and Replace).
  10. Install the front passenger floormat.
  11. Return the front passenger seat to its original position.
  12. Install the bolts that attach the LH front of the center console to the body.
    7 Nm (5.2 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    Nota
    Use of the following tool(s) is recommended:
    • 10 mm socket
  13. Install the LH center console side panel carpet. See Side Panel - Center Console - LH (Remove and Replace).
  14. Install the driver floormat.
  15. Return the driver seat to its original position.
  16. Raise all the windows and close all the doors.