Plenum - Inlet - HVAC (Remove and Replace)
Correction code
18109102
0.12
NOTA: Salvo diversa ed esplicita indicazione nella procedura, il codice modifica e il tempo forfettario, o FRT, riflettono tutto il lavoro richiesto per l'esecuzione di questa procedura, incluse le procedure collegate. Non cumulare i codici modifica a meno che non venga detto esplicitamente di farlo.
NOTA: Consultare la Tempistica tariffe fisse per saperne di più sui tempi forfettari e su come essi vengono creati.
NOTA: Consultare Protezione personale per assicurarsi di indossare i DPI adatti quando si esegue la procedura descritta di seguito. NOTA: Vedere per le pratiche di lavoro in sicurezza.
Remove
- Remove the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).
- Remove the cabin intake duct. See Duct - Upper - Cabin Intake (Remove and Replace).
-
Release the clips that
attach the HVAC inlet plenum to the inner HVAC plenum duct, and then remove
the HVAC inlet plenum from the vehicle.
Install
Installation procedure is the reverse of removal, except for the following:
- Align the tab at the bottom of the HVAC inlet plenum before attaching the clips.