Radiator (Non-Heat Pump) (Remove and Replace)
Correction code
18301002
1.56
NOTA: Salvo diversa ed esplicita indicazione nella procedura, il codice modifica e il tempo forfettario, o FRT, riflettono tutto il lavoro richiesto per l'esecuzione di questa procedura, incluse le procedure collegate. Non cumulare i codici modifica a meno che non venga detto esplicitamente di farlo.
NOTA: Consultare la Tempistica tariffe fisse per saperne di più sui tempi forfettari e su come essi vengono creati.
NOTA: Consultare Protezione personale per assicurarsi di indossare i DPI adatti quando si esegue la procedura descritta di seguito. NOTA: Vedere per le pratiche di lavoro in sicurezza.
Remove
- Remove the cooling fan module. See Module - Cooling Fan (Remove and Install).
-
Release the clips that
attach the active grille shutter to the cooling fan module, and then remove
the active grille shutter from the module.
-
Remove the screws that
attach the radiator to the condenser fan module.
10 Nm (7.4 lbs-ft) -
Release the clip that
attaches the radiator to the condenser fan module, and then remove the
radiator from the condenser fan module.
Install
Installation procedure is the reverse of removal, except for the following:
- Perform a cooling system vacuum refill. See Cooling System (Vacuum Refill).