Noise Absorber - Motor Bay - Front (Remove and Replace)
Correction code
12010102
2.76
NOTA: Salvo diversa ed esplicita indicazione nella procedura, il codice modifica e il tempo forfettario, o FRT, riflettono tutto il lavoro richiesto per l'esecuzione di questa procedura, incluse le procedure collegate. Non cumulare i codici modifica a meno che non venga detto esplicitamente di farlo.
NOTA: Consultare la Tempistica tariffe fisse per saperne di più sui tempi forfettari e su come essi vengono creati.
NOTA: Consultare Protezione personale per assicurarsi di indossare i DPI adatti quando si esegue la procedura descritta di seguito. NOTA: Vedere per le pratiche di lavoro in sicurezza.
Apparecchiatura:
- 1133569-00-A Pliers, Clip Removal
- 2025-01-08: Updated LH front door harness link to main front harness and added connector image for clarity.
Remove
- Remove the brake booster. See #GUID-0CE8F156-928A-4338-A693-CF6EEB9055E6.
- Remove the windshield washer reservoir. See Reservoir - Windshield Washer (Remove and Replace).
- Remove the steering column control module. See .
- Release coolant hoses from car computer. See .
-
Release the black connector from the right body controller and disconnect. See .
-
Remove the front dash noise absorber from the vehicle.
Install
-
Install the front dash noise absorber from the vehicle.
- Connect black connector from right body controller and disconnect. See .
- Connect coolant hoses from car computer. See .
- Install the steering column control module. See .
- Install the windshield washer reservoir. See Reservoir - Windshield Washer (Remove and Replace).
- Install the brake booster. See #GUID-0CE8F156-928A-4338-A693-CF6EEB9055E6.