2026-05-12

Seal - Trunk (Remove and Replace)

Correction code 11702002 0.18 NOTA: Salvo diversa ed esplicita indicazione nella procedura, il codice modifica e il tempo forfettario, o FRT, riflettono tutto il lavoro richiesto per l'esecuzione di questa procedura, incluse le procedure collegate. Non cumulare i codici modifica a meno che non venga detto esplicitamente di farlo. NOTA: Consultare la Tempistica tariffe fisse per saperne di più sui tempi forfettari e su come essi vengono creati. NOTA: Consultare Protezione personale per assicurarsi di indossare i DPI adatti quando si esegue la procedura descritta di seguito. NOTA: Vedere per le pratiche di lavoro in sicurezza.

Warning IconA warning icon, calling your attention to a possibly risky situation
Avvertenza
I video inclusi in questa procedura hanno il solo scopo di fornire una panoramica supplementare. Seguire tutti i passaggi elencati nella procedura per evitare danni ai componenti e/o lesioni personali.

Install

  1. Align the line on the trunk seal to the striker.
  2. Install the trunk seal to the perimeter of the trunk.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Tap the trunk seal with a rubber hammer and use a plastic trim tool to fully install the trunk seal to the body.
    Informational PurposesAn informational icon, calling your attention
    Note
    Make sure the bottom of the seal is tucked into the rear fascia.
  3. Install the trunk sill trim. See Trim - Sill - Trunk (Remove and Replace).
  4. Pull the strings on the trunk seal to seat it flush across the interior.
  5. Install the rear trunk floor.
  6. Close the trunk.