2026-05-12

Cover - Hood Latch (Remove and Replace)

Correction code 15241102 0.06 NOTA: Salvo diversa ed esplicita indicazione nella procedura, il codice modifica e il tempo forfettario, o FRT, riflettono tutto il lavoro richiesto per l'esecuzione di questa procedura, incluse le procedure collegate. Non cumulare i codici modifica a meno che non venga detto esplicitamente di farlo. NOTA: Consultare la Tempistica tariffe fisse per saperne di più sui tempi forfettari e su come essi vengono creati. NOTA: Consultare Protezione personale per assicurarsi di indossare i DPI adatti quando si esegue la procedura descritta di seguito. NOTA: Vedere per le pratiche di lavoro in sicurezza.

Remove

  1. Open the hood.
  2. Release the clips that attach the hood latch cover to the body.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Grab the cover from the bottom, and then pull it upward to release the clips.
  3. Disconnect the electrical harness from the child safety switch connector, and then remove the cover from the vehicle.

Install

Installation procedure is the reverse of removal, except for the following:

  1. Prior to installation of the hood latch cover, use a torch light to inspect the inside of the hood latch housing for any foreign object that may have dropped in. If any object is found, remove it and confirm that the hood latch is operating as intended.
  2. Inspect the clips (x4) of the hood latch cover that attach the cover to the vehicle body for any damage. If damage is found or when any clip is dislodged or missing, replace the hood latch cover with a new one since the hood latch panel clips are non serviceable parts.