2026-05-12

Cover - Hood Latch (Remove and Replace)

Correction code 15241102 0.06 NOTA: Salvo explicitamente indicado em contrário no procedimento, o código de correção acima e o FRT refletem todo o trabalho necessário para a realização deste procedimento, incluindo os procedimentos associados. Não acumule códigos de correção, salvo se explicitamente instruído. NOTA: Consulte Tempos de taxa fixa para saber mais sobre FRT e sobre a respetiva criação. NOTA: Consulte Proteção pessoal para garantir que utiliza o EPI adequado durante a realização do procedimento abaixo. NOTA: Consulte para conhecer as práticas seguras e saudáveis de trabalho.

Remove

  1. Open the hood.
  2. Release the clips that attach the hood latch cover to the body.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Grab the cover from the bottom, and then pull it upward to release the clips.
  3. Disconnect the electrical harness from the child safety switch connector, and then remove the cover from the vehicle.

Install

Installation procedure is the reverse of removal, except for the following:

  1. Prior to installation of the hood latch cover, use a torch light to inspect the inside of the hood latch housing for any foreign object that may have dropped in. If any object is found, remove it and confirm that the hood latch is operating as intended.
  2. Inspect the clips (x4) of the hood latch cover that attach the cover to the vehicle body for any damage. If damage is found or when any clip is dislodged or missing, replace the hood latch cover with a new one since the hood latch panel clips are non serviceable parts.