2026-05-12

Seat Cushion - Lower - 2nd Row (Remove and Replace)

Correction code 13051002 0.12 NOTA: Salvo explicitamente indicado em contrário no procedimento, o código de correção acima e o FRT refletem todo o trabalho necessário para a realização deste procedimento, incluindo os procedimentos associados. Não acumule códigos de correção, salvo se explicitamente instruído. NOTA: Consulte Tempos de taxa fixa para saber mais sobre FRT e sobre a respetiva criação. NOTA: Consulte Proteção pessoal para garantir que utiliza o EPI adequado durante a realização do procedimento abaixo. NOTA: Consulte para conhecer as práticas seguras e saudáveis de trabalho.

Remove

  1. Move the driver seat and the front passenger seat fully forward.
    Informational PurposesAn informational icon, calling your attention
    Note
    Note the position of the driver seat and the front passenger seat prior to movement so that both seats are restored to their original position during installation.
  2. While pressing the LH and RH tabs towards the LH side of the vehicle, lift the front edge of the seat cushion.
  3. Disconnect the electrical connectors on each end of the seat cushion, and then remove the seat cushion from the vehicle.
  4. Inspect the ancillary bay probe lid cover on the ancillary bay for the presence of a breather.
  5. If the breather is missing, install one now.
    Informational PurposesAn informational icon, calling your attention
    Note
    After installing the breather, if necessary, return to the procedure that required removal of the 2nd row lower seat cushion.

Install

  1. Position the seat cushion in the vehicle.
  2. Connect the electrical connectors on each side of the seat cushion.
  3. Insert the seat belt buckles through the seat cushion holes.
  4. Slide the seat cushion inward, align the front guide tabs to the locking tabs, and then push the seat cushion into the tabs.
  5. Make sure that the seat cushion is fully seated with a push and pull test near the tabs.
  6. Move the driver seat and the front passenger seat to their original position.