Turning the System Off

If Powerwall 3 is unresponsive, it may be necessary to turn off or power cycle the system. Note that power cycling the system must be done in the proper sequence as defined below.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
On Powerwall 3 systems with additional interconnected solar, always turn off the solar inverter(s) or disconnect the solar source(s) before turning off Powerwall 3.

Performing a Power Cycle

  1. Turn off Powerwall 3 by setting its On/Off switch to the OFF position.
  2. Turn off the AC breaker to Powerwall 3.
  3. Turn off the AC breaker to the Gateway, if installed (for whole-home backup systems, this may be a breaker inside the Backup Gateway).
  4. Wait for at least one hour.
  5. Turn the AC breakers back on.
  6. Turn on Powerwall 3.