Week Ending December 24, 2022

The following new procedure(s) were added:

1. GUID-FD15697E-4A06-4DDB-A3D1-9028716F5B49.html
2. GUID-1A24EEDD-C4BB-462E-882E-18A176026B0C.html

Week Ending December 17, 2022

The following new procedure(s) were added:

1. Cover - Inverter - Drive Unit - Front (Remove and Replace)

The following procedure(s) were updated:

1. Contactor - Fast Charge - HV Battery (Remove and Replace) - Updated pyro fuse, air leak test, and HV battery installation sequence.
2. GUID-BB5C293C-3B66-473E-8B96-F07014ACEA7E.html - Updated pyro fuse, air leak test, and HV battery installation sequence.
3. Contactor - Positive - HV Battery (Remove and Replace) - Updated pyro fuse, air leak test, and HV battery installation sequence.
4. GUID-70A86EC2-4187-4152-BD2F-11982A234CD4.html - Updated pyro fuse, air leak test, and HV battery installation sequence.
5. Cover - Front Access - HV Battery (Remove and Install) - Updated pyro fuse, air leak test, and HV battery installation sequence.
6. Cover - Rear Access - HV Battery (Remove and Replace) - Updated pyro fuse, air leak test, and HV battery installation sequence.
7. GUID-365117CD-3D9C-43D8-8605-EF45D54217FB.html - Updated pyro fuse, air leak test, and HV battery installation sequence.
8. Link - Fore - Lower - Rear - LH (Remove and Replace) - Updated torque information.
9. GUID-1F9EE450-613A-4A86-AB71-CE0F1482D166.html - Updated pyro fuse, air leak test, and HV battery installation sequence.
10. GUID-0ABDA74E-54B8-49C4-9D65-B7F97A359938.html - Updated pyro fuse, air leak test, and HV battery installation sequence.

Week Ending December 10, 2022

The following new procedure(s) were added:

1. Switch - Lid - Center Console (Remove and Replace)

The following procedure(s) were updated:

1. Seat Assembly - 1st Row - LH (Remove and Replace) - Updated references from Driver to 1st row LH.

Week Ending November 26, 2022

The following procedure(s) were updated:

1. Replacement Keys - Program (No Keys Present) - Updated steps for pairing key fob(s).
2. Inverter - Front Drive Unit (Remove and Replace) - Added overview videos.

Week Ending November 19, 2022

The following new procedure(s) were added:

1. Cooling System (Check and Fill) - This procedure decribes coolant top off without system air purge.
2. Pad - Lifting - Each (Remove and Replace)

The following procedure(s) were updated:

1. Cooling System (Partial Refill and Bleed) - Updated procedure title. This procedure describes coolant top off and system air purge.
2. Firmware Update - Updated steps per latest prompts on the vehicle touchscreen.

Week Ending November 12, 2022

The following procedure(s) were updated:

1. - Updated procedure to perform alignment check only drifting/pulling noticed during the test drive.
2. Sensor - Radar - Front (Remove and Replace) - Updated procedure to perform alignment check only drifting/pulling noticed during the test drive.
3. Windshield (Remove and Install) - Added a Caution and image to show two locations to be extra cautious when cutting urethane.

Week Ending November 5, 2022

The following procedure(s) were updated:

1. GUID-335C6F6A-898C-4130-9F72-09C9281D3720.html - Added/updated cross references to pyrotechnic battery disconnect procedure with voltage check.
2. Contactor - Fast Charge - HV Battery (Remove and Replace) - Added/updated cross references to pyrotechnic battery disconnect procedure with voltage check.
3. GUID-BB5C293C-3B66-473E-8B96-F07014ACEA7E.html - Added/updated cross references to pyrotechnic battery disconnect procedure with voltage check.
4. Contactor - Positive - HV Battery (Remove and Replace) - Added/updated cross references to pyrotechnic battery disconnect procedure with voltage check.
5. GUID-70A86EC2-4187-4152-BD2F-11982A234CD4.html - Added/updated cross references to pyrotechnic battery disconnect procedure with voltage check.
6. Cover - Front Access - HV Battery (Remove and Install) - Added/updated cross references to pyrotechnic battery disconnect procedure with voltage check.
7. Cover - Rear Access - HV Battery (Remove and Replace) - Added/updated cross references to pyrotechnic battery disconnect procedure with voltage check.
8. Harness - High Voltage Controller - HV Battery (Remove and Replace) - Added/updated cross references to pyrotechnic battery disconnect procedure with voltage check.
9. Harness - LV - Front - HV Battery (Remove and Replace) - Added/updated cross references to pyrotechnic battery disconnect procedure with voltage check.
10. GUID-365117CD-3D9C-43D8-8605-EF45D54217FB.html - Added/updated cross references to pyrotechnic battery disconnect procedure with voltage check.
11. GUID-560C2AAC-410F-4209-A33C-F008BF9C43BD.html - Added/updated cross references to pyrotechnic battery disconnect procedure with voltage check.
12. GUID-1F9EE450-613A-4A86-AB71-CE0F1482D166.html - Added/updated cross references to pyrotechnic battery disconnect procedure with voltage check.
13. GUID-0ABDA74E-54B8-49C4-9D65-B7F97A359938.html - Added/updated cross references to pyrotechnic battery disconnect procedure with voltage check.

Week Ending October 29, 2022

The following new procedure(s) were added:

1. Liftgate (Remove and Replace)

The following procedure(s) were updated:

1. Four Wheel Alignment Check and Adjust - Update torque for the LH lower aft link to front subframe to 127 Nm

Week Ending October 22, 2022

The following new procedure(s) were added:

1. Actuator - Pedestrian Protection - LH (EMEA) (Remove and Replace)
2. Busbars - Charge Port to HV Battery (EMEA) (Remove and Replace)
3. Charge Port (EMEA) (Remove and Replace)
5. Door Panel - Charge Port (Remove and Replace)
6. Foam - Back Rest - Driver Seat (With Inboard Airbag) (Remove and Replace)
7. Harness - Body - LH (EMEA) (Remove and Replace)
8. Harness - Main Front (EMEA) (Remove and Replace)
9. Safety Cap - Busbar - Charge Port to HV Battery (EMEA) (Remove and Replace)
10. GUID-38C5D93E-C54C-48C4-A84E-C92B0FB90BB5.html
11. Siren - Battery Backed (EMEA) (Remove and Replace)

The following procedure(s) were updated:

1. Pyrotechnic Battery Disconnect (Remove and Replace) - Added steps to balance the voltage across the pyrotechnic battery disconnect mount points.

Week Ending October 15, 2022

The following procedure(s) were updated:

1. GUID-9B84A64A-4567-4FBA-AF73-6D398DF4FDEA.html - Added torque specification

Week Ending October 8, 2022

The following new procedure(s) were added:

1. Controller - High Voltage (Backup and Restore)

The following procedure(s) were updated:

1. GUID-70A86EC2-4187-4152-BD2F-11982A234CD4.html - Added links to backup and restore procedures.
2. GUID-4F0CC58D-B44F-4026-AD05-638A9ED4CCB2.html - Added first step to de-energize the Wall Connector or UMC, and step to put on PPE.