Replacing Wiper Blades

For optimum performance, replace the wiper blades at least once a year. Replacement blades must meet the following criteria:
  • The blade on the driver's side must be 26 inches (650 mm) long and 21 inches (530 mm) long for the blade on the passenger's side.
  • Ensure the connector on the replacement blade is the same as the original blade. Different connectors may prevent the replacement blade from connecting to the wiper arm on the vehicle.

You can purchase replacement wiper blades on the Tesla Shop (or https://shop.tesla.cn/ for China).

Informational PurposesAn informational icon, calling your attention
Note
Only install replacement blades that are identical to the original blades. Using inappropriate blades can damage the wiper system and windshield.
Informational PurposesAn informational icon, calling your attention
Note
The wiper washing system is an integrated part of the wiper blades on Model X.

To replace the wiper blades:

  1. Shift into Park and turn off the wipers.
  2. Touch Controls > Service > Wiper Service Mode to move the wipers to the service position.
  3. Lift the wiper arm a short distance away from the windshield, just far enough to access the wiper blade.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Wiper blades do not lock into a lifted position. Do not lift a wiper arm beyond its intended position.
  4. Squeeze the two tabs to release the wiper blade from the wiper arm.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    The wiper blade is still connected to the washer hose and cannot be removed yet.
    Close-up of wiper blade with two blue arrows pointing to tabs
  5. Place a towel between the wiper arm and windshield to avoid scratching or cracking the windshield.
  6. Disconnect the washer hose from the wiper blade, taking care to avoid spilling any washer fluid.
    Towel folded under blade with a blue arrow pointing away indicating how to disconnect washer hose
  7. Hold the wiper arm and press the locking tab while sliding the blade down the arm.
  8. Fully insert the washer hose onto the nipple of the new wiper blade.
  9. Align the new wiper blade on the wiper arm and slide it toward the end of the wiper arm until it locks into place.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Ensure the new blade is locked in place and does not move. Perform a push-pull test to confirm. If not locked in place (you can hear and feel a "click"), the wiper blade may come off during use, resulting in serious damage.
  10. Turn Wiper Service Mode off to return the wipers to their normal position.