Pipe - High Pressure - Compressor to Condenser

FRT No: 18032002

    Remove


  1. Remove HVAC assembly (refer to procedure).

  2. Loosen the high pressure compressor to condenser pipe at the condenser retaining nut (torque - 25 Nm).
    3. CAUTION: To prevent damage always use a suitable wrench to hold backing nut when loosening pipes and unions.
     

    CAUTION: Plug pipe connections to prevent ingress of moisture or dirt.
     


  3. Remove nut securing the high pressure compressor to condenser pipe connection at the compressor (torque - 25 Nm).
    4. CAUTION: Plug pipe connections to prevent ingress of moisture or dirt.
     


  4. Remove the high pressure compressor to condenser pipe.

    Installation


  1. Installation procedure is reverse of removal except for the following.

  2. Replace A/C pipe O-rings.

    3. NOTE: Lubricate new O-ring seals with clean refrigerant oil.