Service Mode Release Notes

2025.20.3

Noise Recording Panel Updates (Service Mode Plus) - Available on Info-Atom and Info-Ryzen

The Noise Recording Panel is now available on all vehicles equipped with Info-Atom and Info-Ryzen Infotainment hardware. This panel adds the ability to record powertrain noise using the vehicle microphones and related vehicle metrics. The recordings can also be downloaded to a computer using a dedicated action, and the recordings are deleted when exiting Service Mode.

Model S (2012-2020), Model 3, Model X (2015-2020), and Model Y

2025.20

New A2B Audio System Panel

A new Automotive Audio Bus (A2B) Audio panel is available to support Audio system diagnosis relating to the A2B bus. It adds the ability to view the expected nodes on the A2B bus along with details of detected conditions.

Model 3 (2024+) and Model Y (2020-2024) with AMD Ryzen™ Infotainment Processor

2025.14.3

Falcon Door Panel Updates - Interactive Ultrasonic Sensor Diagnostic Procedure

An interactive diagnostic procedure has been added to the Falcon Door panel to support ultrasonic sensor false detection diagnosis.

Model X

2025.14

New Second Row Seats Panel

A new Second Row Seats panel is available to support seats diagnosis. It adds the ability to determine the status of the seat recliner components and perform recliner motor calibrations.

2025+ Model Y

Connector Reference (Service Mode Plus)

A new Connector Reference panel is available to help find connectors and highlight harnesses on the vehicle. Rotate the 3D model to explore or type in the search bar to find a specific connector.

2024+ Model 3, 2025+ Model Y

New Guided Headlight Aiming Workflow

A new guided Headlight Aiming workflow is available to assist with adjusting the aim of the headlights. To access the new workflow, tap Controls > Service > Adjust Headlights on the touchscreen User Interface (UI).

Model 3 and Model Y with DAS HW4 located in USA and Canada

Noise Recording Panel (Service Mode Plus) Updates - Recordings Viewer

A Recordings Viewer has been added to the Noise Recording panel. It adds the ability to view and delete recordings that were created using the Noise Recording panel.

Cybertruck

HVAC Panel Updates - Top-Down Cabin View and Thermal Component Testing

A top-down cabin view and the ability to view the statuses of sensors, temperatures, temperature targets, and mass flows throughout the HVAC system have been added to the HVAC panel.

Cybertruck

2025.8

New HVAC Panel

A new HVAC panel is available to support HVAC system diagnosis. It adds the ability to determine the status of the HVAC actuators, HEPA filter, and blower motor.

Cybertruck

HV Battery Panel Update - Moved State of Health (SOH) Routine

The State of Health (SOH) routine in the HV Battery panel has been moved to the Controls > Service tab, which does not require entering Service Mode or Service Mode Plus.

2021+ Model S, 2021+ Model X, Model 3, Model Y

Windows Panel Update - Rear Defrost Routine

The rear defrost component on the Windows panel has been updated to simplify diagnostics. The re-enable routine will now be visible all the time, but it can only be ran when a condition requiring its usage is detected.

2021+ Model S, 2021+ Model X, Model 3, Model Y

Seats Panel Update - Cabin Radar and Seat Sensor

The Seats panel has been updated to show whether the cabin radar and/or seat sensor is being used to detect occupants in the front seats.

Model 3, Model Y, Cybertruck

Brakes Panel Update - Update Gateway Configurations

The gateway configurations for brake hardware type and caliper color can now be updated on the Brakes panel.

Model 3 (2017-2023), Model Y (2020-2024), Model S (2021+), Model X (2021+)

Steering Panel Update - Update Gateway Configurations

The gateway configuration for the steering column motor type can now be updated on the Steering panel.

Model 3, Model Y

Service Mode Update - Media Source Switches to Bluetooth

When entering Service Mode, the Media Source will now automatically switch to Bluetooth to prevent the vehicle from playing media using the customer's connected media accounts.

Model S, Model X, Model 3, Model Y

Charging Panel Update - Charge Port ECU Reset Routine

The Charge Port Electronic Control Unit (ECU) reset routine, TEST-RESET_CP, has been added to the Charging panel, which may be required after performing Charge Port related service.

Model3, ModelY, Palladium S, Palladium X, Cybertruck

Noise Recording Panel Update - Moved to Tools

The Noise Recording panel has been moved from the the High Voltage panel to the Tools panel. To access the panel, tap Tools > Noise Recording.

Cybertruck

Coolant Panel Update - Coolant Purge Status Indicator

An indicator has been added to the Coolant panel to report the status of the coolant purge and whether the coolant purge needs to rerun.

Cybertruck

2025.2

New Accessories Panel (Service Mode Plus)

A new Accessories panel is available to view and change configurations for accessories during retrofits, such as tow package, power liftgate, and spoiler. To access the new panel, tap Low Voltage > Accessories.

Model 3, Model Y

New Signal Viewer Panel (Service Mode Plus)

A new Signal Viewer panel is available to monitor multiple signal values live on a graph. If one or more of the signal values is unavailable, the graph will stop updating. To access the new panel, tap Tools > Signal Viewer.

2021+ Model S, 2021+ Model X, 2024+ Model 3, Cybertruck, Model Y with AMD Ryzen™ infotainment processor

Brakes Panel Updates - Brake Burnishing

The Brake Burnishing procedure parameters have been updated to reduce the need for coming to almost a complete stop during each cycle.

All vehicles

Charging Panel Updates - Charge Port Door and Latch

The charge port door calibration routine (PROC_CP_X_DOOR-SENSOR-CALIBRATION) and charge port latch calibration routine (PROC_CP_X_LATCH-CALIBRATION) have been added to the Charging panel. Those routines are required to be run following the replacement of the charge port or charge port door.

2012-2020 Model S, 2015-2020 Model X

Noise Recording Panel (Service Mode Plus) Updates

To improve the user experience, the recording duration has been decreased to 30 seconds, and the reliability of the download routine PROC_ICE_X-FETCH-DIAGNOSTIC-AUDIO-RECORDINGS has been improved.

Cybertruck

2024.44.25

Connector Reference (Service Mode Plus)

A new Connector Reference panel is available to help find connectors and highlight harnesses on the vehicle. Rotate the 3D model to explore or type in the search bar to find a specific connector.

Cybertruck

2024.44

New Brakes Panel

A new Brakes panel is available to start diagnosing wheel speed sensors and brakes systems, such as Electronic Park Brake (EPB), Electronic Stability Program (ESP), and Electromechanical Brake Booster (iBooster). It also adds the ability to perform repair actions, such as releasing the EPBs, performing brake stiffness tests, and bleeding the brakes. To access the new panel, tap Chassis > Brakes.

Cybertruck

Brakes Panel Updates - Brake Burnishing

If the vehicle is shifted into Reverse during a brake burnishing test, the rear-view camera feed will appear, and the brake burnishing test will continue in the background. To return to the current brake burnishing test, go to Chassis > Brakes or shift the vehicle into Drive.

All vehicles

New Speakers Panel

A new Speakers panel is available to support Audio system diagnosis. During a speaker test, it allows audio to be played through selected speakers to diagnose speaker performance conditions, such as the presence of rattle noises. It also adds the ability to play specific frequencies through the speakers and reset the Audio system if needed.

2024+ Model 3, Model Y with AMD Ryzen™ infotainment processor

SCCM Panel Updates - Graphics and Swap Button

The steering wheel and yoke graphics in the Steering Column Control Module (SCCM) panel have been updated to correctly display the physical horn variant. A new button has also been added to the bottom of the panel to perform a steering wheel / yoke swap, which requires the airbag's Part Number (PN) to ensure the correct variant has been installed during the swap.

2021+ Model S, 2021+ Model X

SCCM Panel Updates - Post-Replacement Procedure

A new button has been added to the bottom of the Steering Column Control Module (SCCM) panel to run the post-replacement steering wheel procedure, PROC_VCLEFT_X_STEERING-WHEEL-POST-REPLACEMENT-PROCEDURE.

2024+ Model 3

New Interior Lighting Panel

A new Interior Lighting panel is available to support Interior Lighting diagnostics and repairs. It offers an overview of the RGB light health states and the ability to run the RGB light addressing routine, which is required after replacing the door trim or ambient lights.

2024+ Model 3

New Interior Lighting Panel

A new Interior Lighting panel is available to support Interior Lighting diagnostics and repairs. It offers an overview of the RGB light health states and the ability to run the RGB light addressing routine, which is required after replacing the door trim or ambient lights.

Cybertruck

Thermal Panel Updates - Drain and Fill Routine

In the Thermal panel, users can now run the Fill and Drain modes individually when running the Thermal Drain and Fill routine, PROC_EGGRIGHT3_X_THERMAL-FILL-DRAIN-START.

Cybertruck

Thermal Panel Updates - Drain and Fill Routine

A bug preventing the vehicle from staying in the Drain and Fill mode when the Thermal Drain and Fill routine, PROC_VCFRONT_X_START-THERMAL-FILL-DRAIN, is run has been resolved.

2017-2020 Model 3 with PTC heater

2024.38

New Service History Panel

A new Vehicle Service History panel is available on the homepage, providing the recorded history of service performed on the vehicle. Independent Repairers can record maintenance and service operations with the Record Service button.

All vehicles

New Drive Unit Panel

A new Drive Unit panel is available. It monitors the live status of the drive unit(s) and accelerator pedal signals and identifies active alerts set by the drive unit components to assist in diagnosis.

2021+ Model S, 2024+ Model 3, 2021+ Model X, Cybertruck

New Keys Panel

A new Keys panel is available. This panel shows the health state of different controllers and Bluetooth Low Energy (BLE) endpoints used to communicate with paired keys. In Service Mode Plus, users can pair and un-pair keys directly from the vehicle touchscreen.

2024+ Model 3

New HVIL Panel

A new High Voltage Interlock Loop (HVIL) panel is available with live signals and animation to assist in diagnosis.

Cybertruck

HV Battery Panel Updates

The HV Battery panel now includes brick under-voltage detection and new statuses for sub-pack imbalances.

All vehicles

Electric Power Assisted Steering (EPAS) in Transport / Tow Mode (Service Mode Plus)

To improve user experience based on feedback, when in Service Mode Plus with the High Voltage System active, EPAS will now be powered in Transport Mode. Tap Controls > Service > Towing to activate Transport Mode.

Model 3, Model Y

Touch Check Moved to Display Panel

The Touch Check feature moved to the new Display panel. Access it by going to Infotainment > Display.

All vehicles

2024.32

TPMS Panel for Continental

The Tire Pressure Monitoring System (TPMS) panel is now available for Model 3 with Continental configuration. A new button also enables switching between Tesla Bluetooth Low Energy (BLE) and Continental configuration.

Model 3

HVIL Debug Panel

The High Voltage Interlock Loop (HVIL) Debugging Panel is now available for the new 2024 Model 3.

2024+ Model 3

Drive Unit Panel

The Drive Unit Panel is now available for Model 3 (2017-2023) and Model Y. It can be used to monitor the live status of the Drive Unit and Accelerator Pedal-related signals. To aid in debugging Drive System issues, it can also identify active alerts triggered by the Drive Unit components.

Model 3 (2017-2023), Model Y

Coolant Panel

Coolant Panel is now adapted for the Model 3 Positive Temperature Coefficient (PTC) heater.

2017-2020 Model 3 with PTC heater

Change headlamp configuration

Headlamp configuration can now be modified from the Exterior Lighting panel in Service Mode Plus.

Model 3, Model Y

2024.26.3

Noise Recording Panel (Service Mode Plus)

Use the new noise recording panel to record powertrain noise using the vehicle microphones and related vehicle metrics. Download recordings to a computer using the dedicated action. Recordings are automatically deleted when exiting Service Mode. Go to Tools > Noise Recording.

Cybertruck

2024.26

PTC Heater Panel

A new Thermal panel for vehicles with a Positive Temperature Coefficient (PTC) heater is available. Monitor and diagnose thermal system components and view related alerts.

2017-2020 Model 3 with PTC heater

Thermal Configuration Actions (Service Mode Plus)

Actions are available to update coolant pump, compressor, refrigerant AC line, intake air filter, and PTC control mode thermal configurations.

Model 3, Model Y, 2021+ Model S, 2021+ Model X, Cybertruck

System/Subsystem Filter for Service Alerts (Service Mode Plus)

Filter the list of active and recent alerts by system and subsystem.

Model 3, Model Y, 2021+ Model S, 2021+ Model X

ECU Update Status Panel

To help diagnose an unsuccessful software update, check the latest update status of each Electronic Control Unit (ECU). Go to Infotainment > ECU Update Status.

2012-2020 Model S, 2015-2020 Model X

Updated Low Voltage Power Distribution Panel

The updated interactive Low Voltage (LV) Power Distribution panel helps diagnose LV battery, Front & Battery Vehicle Controllers (VCFRONT & VCBATT), and Power Conversion System (PCS) conditions.

2021+ Model S, 2021+ Model X

Updated High Voltage System Panel

The updated High Voltage (HV) System panel more precisely differentiates between Internal and HV Chain isolation measurements and alerts.

Model 3, Model Y, Model X, 2016+ Model S, Cybertruck

2024.20

New Tire Pressure Monitoring System (TPMS) Panel

A new TPMS panel is available to help manage and diagnose the latest generation TPMS with Bluetooth Low Energy (BLE), such as setting the ID of each TPMS sensor, viewing sensor state and voltage, tire pressure, and more.

Model 3, Model Y, 2021+ Model S, 2021+ Model X, Cybertruck

New ODIN Routine in Connectivity Panel (Service Mode Plus)

A new routine is available to toggle the Subscriber Identity Module (SIM) between onboard e-SIM and physical SIM card. Tap Infotainment > Connectivity to see the relevant action button.

Model 3, Model Y, 2021+ Model S, 2021+ Model X, Cybertruck

New ODIN Routine in Cameras Panel

A new Ethernet PING routine is available to test the communication with APE-A and APE-B over Ethernet. Tap Driver Assist > Cameras to see the relevant action button.

Model S, Model X, Model 3, Model Y, Cybertruck

Electric Power Assisted Steering (EPAS) in Transport/Tow Mode (Service Mode Plus)

To improve user experience based on feedback, when in Service Mode Plus with the High Voltage System active, EPAS will now be powered in Transport Mode. Tap Controls > Service > Towing to activate Transport Mode.

2021+ Model S, 2021+ Model X

2024.14

Stopping Mode defaults to Hold/Creep

To improve user experience based on feedback, the default stopping mode in Service Mode is changed from Roll to: - Hold for Model 3, 2024+ Model 3, Model Y, 2021+ Model S, 2021+ Model X, and Cybertruck - Creep for all vehicles in China, 2012-2020 Model S, and 2015-2020 Model X The default setting will no longer change with the speed limit override. When exiting Service Mode, the preferred driver settings will be restored.

Model S, Model X, Model 3, Model Y, Cybertruck

Acceleration Mode defaults to Chill

The default acceleration mode in Service Mode is Chill. The default setting will no longer change with the speed limit override. When exiting Service Mode, the preferred driver settings will be restored.

Model S, Model X, Model 3, Model Y, Cybertruck

New Keys Panel

A new keys panel is available to help manage and diagnose Keys systems, with key pairing and unpairing routines, antennas and controllers health state, and live BLE (Bluetooth Low Energy) performance data for paired and connected devices.

2021+ Model S, 2021+ Model X

Korean Language

You can now use Service Mode in Korean. Select your preferred language in the drop-down list from Vehicle Info.

Model S, Model X, Model 3, Model Y, Cybertruck

New Drive Unit Replacement Procedures (Service Mode Plus)

A new procedures panel is available to help perform ODIN routines during replacements of the front and rear drive units. To do so, tap High Voltage > Procedures.

Model 3, Model Y, 2021+ Model S, 2021+ Model X, Cybertruck

New Low Voltage Replacement Procedures (Service Mode Plus)

A new procedures panel is available to help perform ODIN routines after replacements of Low Voltage controllers, such as VCFRONT (Front Vehicle Controller) and VCSEC (Vehicle Security Controller). To do so, tap Low Voltage > Procedures.

Model 3, Model Y, 2021+ Model S, 2021+ Model X

New ODIN Routine in HVAC Panel

A new Reset Cabin/HEPA Filter Health Score routine is available to reset the health score to nominal value after replacement. Tap on the filter dot on the right HVAC view to see the relevant action button.

Model 3, Model Y

Audio Settings

When entering Service Mode, the audio volume is muted and media playback is paused. In this mode, you can control the audio volume with the usual controls. When exiting Service Mode, the audio is unmuted and the volume is set back to a default value.

Model S, Model X, Model 3, Model Y, Cybertruck

RGB Light Setting

By default, the RGB light color turns red when entering Service Mode. When exiting Service Mode, the preferred driver settings will be restored.

2024+ Model 3, Cybertruck

2024.8

New Keys Panel

A new keys panel is available to help manage and diagnose Keys systems, with key pairing and unpairing routines, antennas and controllers health state, and live BLE (Bluetooth Low Energy) performance data for paired and connected devices.

Model 3, Model Y

New ODIN Routine in Air Suspension Panel

A new action button is added to clear the crash detected alert (TAS_a025_CrashEvent) in the Tesla Air Suspension (TAS) ECU. Tap on the TAS ECU to see the relevant action button. Note: The action button will be displayed only when the alert is present.

Model S, Model X

Improved Air Purge Routine (for Heat Pump Vehicles)

To streamline the repair process, the Coolant Air Purge routine is improved with a dynamic display of Start/Stop buttons and a countdown timer. Tap Thermal > Coolant System to get started.

Model 3, Model Y, 2021+ Model S, 2021+ Model X, Cybertruck

Enhanced Brakes Panel

Brakes panel is enhanced with health states and alerts in components such as Brake Booster (iBooster), Electronic Park Brake (EPB), and Electronic Stability Program (ESP).

2012-2020 Model S, 2015-2020 Model X

Enhanced Window Calibration

Window calibration is enhanced with thermal protection logic. Now, calibration will run only when the window regulator temperature is low enough in order not to reach an overheating point while calibrating windows.

Model 3, Model Y, 2021+ Model S, 2021+ Model X, Cybertruck

2024.2

Service Mode on Cybertruck

You can now use Service Mode on Cybertruck. Enter Service Mode to explore features and start diagnosing systems such as Etherloop, Steer by Wire, and the Mid Voltage electrical system architecture.

Cybertruck

French Language

You can now use Service Mode in French. Select your preferred language in the drop-down list from Vehicle Info.

Model S, Model X, Model 3, Model Y

New Exterior Lighting Panel (Service Mode Plus)

A new exterior lighting panel is available to help you diagnose lighting systems. To do so, tap Low Voltage > Lighting.

Model 3, Model Y

New ODIN Routines in HV Battery panel (Service Mode Plus)

You can run the Clear Isolation Counters routine after HV component replacement due to low isolation on Model 3, Model Y, 2021+ Model S, and 2021+ Model X. You can also run the Reset SOC routine on 2012-2020 Model S and 2015-2020 Model X.

Model S, Model X, Model 3, Model Y

Updated Windows Panel

The Windows panel has been updated to improve the user experience. You can now run the calibration routine for a single window.

Model 3, Model Y, 2021+ Model S, 2021+ Model X

New Key Fob Panel

A new key fob panel is available to help you diagnose keys system components such as key fobs, low-frequency antennas, and vehicle security controller (BCCEN). You can also directly run the key pairing and unpairing routines from the panel by entering Service Mode Plus.

2015-2020 Model X

New Brakes Panel

A new brakes panel is available to help you diagnose brakes systems such as Brake Booster, Electronic Park Brake (EPB) and Electronic Stability Program (ESP). You can also perform repair actions, such as releasing EPBs, ESP config, bleeding brakes and running a stiffness test.

2012-2020 Model S, 2015-2020 Model X

New Feedback QR Code (Service Mode Plus)

In Service Mode Plus, a QR code is available for feedback with relevant information pre-filled.

Model S, Model X, Model 3, Model Y

2023.44

New Software Panel

A new Software Panel is now available for you to verify the software versions installed and diagnostic information related to the infotainment MCU, autopilot, and maps. You can also perform actions such as software reinstall and ECU update status check. To do so, tap Infotainment > Software.

Model 3, Model Y, 2021+ Model S, 2021+ Model X

Chinese Language

You can now use Service Mode in Chinese. Select your preferred language in the drop-down list from Vehicle Info.

Model S, Model X, Model 3, Model Y

New Feedback Email (Service Mode Plus)

In Service Mode Plus, a new contact email is available for feedback about your experience and requests for new features.

Model S, Model X, Model 3, Model Y

New High Voltage Interlock Loop (HVIL) Panel

A new HVIL panel is available with animation functions and HVIL thresholds to help you diagnose the high voltage interlock loop.

2021+ Model S, 2021+ Model X

Reservoir Inflation in Air Suspension Panel

To help you inflate the air suspension reservoir, a new Inflate button is added under Chassis > Suspension. Tap on the reservoir icon to see the relevant action buttons.

2015-2020 Model X

2023.38

New Brakes Panel

A new brakes panel is available for you to start diagnosing wheel speed sensors and brakes systems such as Electronic Park Brake (EPB), Electronic Stability Program (ESP), and Electromechanical Brake Booster (iBooster). You can also perform repair actions, such as releasing EPBs, bleeding brakes, and running a stiffness test.

Model 3, Model Y, 2021+ Model S, 2021+ Model X

Camera Preview

Preview the front camera pitch verification lines and other cameras as well. To do so, tap Driver Assist > Cameras.

Added for Model S and Model X with FSD computer

Enhanced Instruction HV Shunt Replacement (Service Mode Plus)

New instructions with an image to help you find the shunt resistance value and run the shunt replacement routine. To do so, tap High Voltage > Tools > Shunt Replacement.

Model 3, Model Y, 2021+ Model S, 2021+ Model X

Enhanced Airbags and Seats Panels

New routines to help you perform all required actions after a Restraints Control Module (RCM) replacement.

Model 3, Model Y, 2021+ Model S, 2021+ Model X

2023.32

Enhanced Service Alerts

You can now see additional alerts with payload signals as well as both set and clear timestamps. A history of up to 500 recent alerts can be browsed over time.

Model S, Model X, Model 3, Model Y

ECU Update Status Panel

To help diagnose an unsuccessful software update, you can now check the latest update status of each Electronic Control Unit (ECU). Go to Infotainment > ECU Update Status.

Model 3, Model Y, 2021+ Model S, 2021+ Model X

Update Low Voltage (LV) Battery Type

When replacing the low voltage battery (lead-acid), you can update the configuration to a different type. To do so, tap Low Voltage > Power Distribution > Change Battery Type.

Model 3 and Model Y with lead-acid low voltage battery

Enhanced Heat Pump panels

The Sensors and Valves panel was removed and its functionality is now available in the Refrigerant System panel. Simply tap on a sensor or valve to see the relevant information.

Model 3 and Model Y with heat pump, 2021+ Model S, 2021+ Model X

New ODIN Routines in Coolant System Panel

New Coolant Valve Test and Coolant Purge Stop routines are now available.

Model 3 and Model Y with heat pump, 2021+ Model S, 2021+ Model X

2023.26

Clear Camera Calibration and Verify Camera Pitch

Clear the camera calibration data in the Driver Assist > Cameras panel and use the new Camera Preview to show the front camera pitch verification lines. Note: During calibration, autopilot features may not be available.

Model 3, Model Y, 2021+ Model S, and 2021+ Model X with FSD computer

Enhanced Procedure for Carbon Ceramic Brake Burnishing

Brake Burnishing feature is enhanced with an updated procedure for vehicles equipped with carbon ceramic brakes.

Model S Plaid with carbon ceramic brakes

New Steering Column Control Module (SCCM) Panel

Test the turn signal (stalk or buttons), scroll wheels, and other steering wheel features.

Model 3, Model Y, 2021+ Model S, 2021+ Model X

New Falcon Door Panel

Visually check the falcon door health status, control the door from the panel, and test obstacles detection by ultrasonic sensors (USS).

Model X

Airbags and Seats Panel moved to Service Mode

Access the Airbags and Seats panels from Service Mode with basic functions. Enter Service Mode Plus for advanced functions of the panel.

Model 3, Model Y, 2021+ Model S, 2021+ Model X

Enhanced Low Voltage (LV) Power Distribution Panel

Redesigned interactive power distribution panel to help you diagnose low voltage issues with LV Battery, Front Vehicle Controller (VCFRONT), and Power Conversion System (PCS).

Model 3, Model Y

Enhanced High Voltage Interlock Loop (HVIL) Panel

Check the panel with enhanced animation functions and updated HVIL thresholds.

Model 3, Model Y

Enhanced Steering Panel

Clear the steering angle offset prior to wheel alignment with enhanced visuals and descriptions. To do so, tap Chassis > Clear Applied Offset.

Model 3, Model Y, 2021+ Model S, 2021+ Model X

Enhanced High Voltage (HV) Battery Panel

Check the enhanced visuals for shipping and health status.

Model S, Model X, Model 3, Model Y