Device Page Overview
The following pages can be viewed by selecting System, then selecting the desired device from the Devices tab.
![](GUID-999C14E6-382D-4C54-8E0D-0D509DC0237A-online-en-US.png)
Note
The Devices tab populates automatically. If a device does not appear, check the
communication wiring for errors.
Backup Switch / Backup Gateway Device Page Overview
The Backup Switch or Backup Gateway act as the Islanding Contactor; this page provides a more direct view of the island state of the system and the state of the micro-grid.
![](GUID-C9B5A549-14BD-4B9D-B001-9166412EF708-online-en-US.png)
1 | Contactor State | On Grid / Off Grid |
2 | Vitals |
Grid State:
|
Line voltage 1 | ||
Frequency 1 |
1 When the system is off-grid, the micro-grid (load-side) values are shown as the voltage / frequency can be different on the grid and home side of the island.
Powerwall+ Device Page Overview
![](GUID-90796765-B182-423F-AAE4-FE685CA67574-online-en-US.png)
1 | Vitals | Solar generation, battery charge level, charge/discharge power |
2 | Inverter State | Disable / DC Only / Enable |
3 | MPPT | DC voltage and current for each active MPPT |
4 | Battery State | State, phase and line voltage, frequency |
Powerwall 2 Device Page Overview
![](GUID-AB1024B9-FDDF-4E04-A498-C5B1DFEF4E1C-online-en-US.png)
1 | Vitals | Battery charge level, charge/discharge power |
2 | Battery State | State, phase and line voltage, frequency |
Tesla Solar Inverter Device Page Overview
![](GUID-D0C8AD05-D8C9-445C-B5EC-7786F7568B0B-online-en-US.png)
1 | Vitals | Solar generation |
2 | Inverter State | Disable / DC Only / Enable |
3 | AC Vitals | AC voltage vitals |
4 | MPPT | DC voltage and current for each active MPPT |